Yayınlar & Eserler

ATLAS Yayın Analitiği
Makaleler 65
Tümü (65)
SCI-E, SSCI, AHCI (45)
SCI-E, SSCI, AHCI, ESCI (52)
ESCI (7)
Scopus (56)
TRDizin (8)
Diğer Yayınlar (3)

1. High-efficiency PV/T system with embedded two-phase Enhanced Heat Pipe (EHP) and secondary water cooling

Sabry A. H., BIYIKOĞLU A., ÇAMDALI Ü.
Applied Thermal Engineering , cilt.291, 2026 (SCI-Expanded, Scopus)

2. Calculation of the Potential of Solar Radiation and Efficiency of its Conversion into Exergy

Özel S., ÇAMDALI Ü., Tunç M.
Journal of Engineering Physics and Thermophysics , cilt.99, sa.1, ss.264-268, 2026 (ESCI, Scopus)

3. A comprehensive review of unmanned aerial vehicle-based thermal imaging and deep learning for PV power plant anomaly detection and performance assessment

Sabry A. H., BIYIKOĞLU A., ÇAMDALI Ü.
Engineering Applications of Artificial Intelligence , cilt.163, 2026 (SCI-Expanded, Scopus)

4. Termodinamiğin Yasalarına Fiziğin ve Felsefenin Penceresinden Farklı Bir Bakış

Çamdalı Ü.
Uluslararası Mühendislik Araştırma ve Geliştirme Dergisi , cilt.16, sa.2, ss.909-913, 2024 (TRDizin)

5. EKONOMİNİN TERMODİNAMİK YASALARI

ÇAMDALI Ü.
Uluslararası Mühendislik Araştırma ve Geliştirme Dergisi , 2024 (TRDizin)

6. The Derivation of System Parameters for a Ground Source Heat Pump (GSHP)

ÇAMDALI Ü., TUNÇ K. M. M., ERDEM M. E., Tunçer E.
INTERNATIONAL JOURNAL OF RENEWABLE ENERGY RESEARCH , 2024 (ESCI, Scopus)

7. DETERMINATION OF THE MASS BALANCE OF HIGH-CARBON FERROCHROME IN A SUBMERGED ARC FURNACE

Kapan S., ÇAMDALI Ü., Celik N.
High Temperature Material Processes , cilt.28, sa.3, ss.1-8, 2024 (ESCI, Scopus)

8. Elektrik Ark Fırınındaki Çelik Üretiminin Termodinamik Açıdan Analizi

ÇAMDALI Ü., TUNÇ K. M. M.
Uluslararası Mühendislik Araştırma ve Geliştirme Dergisi , 2024 (TRDizin)

9. The effects of CuO/CeO2 mixture nanoparticles on the performance of a vapor compression refrigeration system

Mohamed H. A., ÇAMDALI Ü., BIYIKOĞLU A., AKTAŞ M.
Scientific Reports , cilt.12, sa.1, 2022 (SCI-Expanded, Scopus) Creative Commons License

10. Thermodynamic analysis for a solar assisted absorption cooling system: Energy and exergy bases

Akkaya M., ÇAMDALI Ü.
INTERNATIONAL JOURNAL OF RENEWABLE ENERGY RESEARCH , cilt.12, ss.2189-2199, 2022 (ESCI, Scopus)

11. Performance analysis of R134a vapor compression refrigeration system based on CuO/CeO2 mixture nanorefrigerant

Mohamed H. A., ÇAMDALI Ü., BIYIKOĞLU A., AKTAŞ M.
Journal of the Brazilian Society of Mechanical Sciences and Engineering , cilt.44, sa.5, 2022 (SCI-Expanded, Scopus)

12. Enhancing the Performance of a Vapour Compression Refrigerator System Using R134a with a CuO/CeO2 Nano-refrigerant

Mohamed H., ÇAMDALI Ü., BIYIKOĞLU A., Actas M.
Strojniski Vestnik/Journal of Mechanical Engineering , cilt.68, sa.6, ss.395-410, 2022 (SCI-Expanded, Scopus) Creative Commons License

13. Ev Tipi Bir Buzdolabının Analitik İncelenmesi ve Tasarımı

Akkaya M., ÇAMDALI Ü.
Mühendis ve Makina , 2021 (TRDizin)

14. Evaluation of a Refrigeration System Based on Nano-Refrigerants and Nano-Lubricants

A. S. H., ÇAMDALI Ü., AKTAŞ M.
AMERICAN JOURNAL OF ENGINEERING AND APPLIED SCIENCES , 2021 (Hakemli Dergi)

15. Ev Tipi Bir Buzdolabının Analitik İncelemesi ve Tasarım Parametrelerinin Elde Edilmesi

AKKAYA M., Camdali U.
Mühendis ve Makina , cilt.62, sa.704, ss.395-414, 2021 (TRDizin) Creative Commons License

16. Analysis of an Electric Arc Furnace Used for Casting of Steel: An Exergy Approach

ÇAMDALI Ü., Tunc M., Arasil G.
Metallurgist , cilt.64, sa.5-6, ss.483-495, 2020 (SCI-Expanded, Scopus)

17. Optimal Domestic Solar Space and Water Heating System in Cesme

Tunc M., Camdali Ü.
INTERNATIONAL JOURNAL OF RENEWABLE ENERGY RESEARCH , cilt.7, sa.4, ss.1806-1815, 2017 (ESCI, Scopus) Sürdürülebilir Kalkınma

18. Optimal Domestic Solar Space and Water HeatingSystem in Çeşme

TUNÇ K. M. M., ÇAMDALI Ü.
Optimal Domestic Solar Space and Water HeatingSystem in Çeşme , cilt.7, sa.4, ss.1806-1815, 2017 (ESCI)

19. Calculation of Chemical Reaction Energy in an Electric Arc Furnace and Ladle Furnace System

Camdali Ü., Tunc M.
METALLURGIST , cilt.60, ss.669-675, 2016 (SCI-Expanded, Scopus)

20. Design Graphical User Interface of Linear Algebra System Package by Using MATLAB

Alziarjawey H., ÇAMDALI Ü., ÇANKAYA İ., ALJOBOURI H.
International Journal on Recent and Innovation Trends in Computing and Communication , cilt.4, sa.6, ss.428-433, 2016 (Hakemli Dergi)

21. Design Graphical User Interface of Linear Algebra System Package by Using

Alziarjawey H., ÇAMDALI Ü., ÇANKAYA İ., Aljobouri H.
International Journal on Recent and Innovation Trends in Computing and Communication , 2016 (Hakemli Dergi)

22. Energy management and optimization: case study of a textile plant in Istanbul, Turkey

Tunc M., Kaplan K., Sisbot S., ÇAMDALI Ü.
WORLD JOURNAL OF ENGINEERING , cilt.13, sa.4, ss.348-355, 2016 (ESCI, Scopus)

23. Numerical modeling of a ground source heat pump: The Bolu case

ÇAMDALI Ü., Bulut M., SÖZBİR N.
RENEWABLE ENERGY , cilt.83, ss.352-361, 2015 (SCI-Expanded, Scopus)

24. Energy Analysis of the Operation of an Electric-Arc Furnace at a Steel Company in Turkey

Tunc M., Camdali Ü., Arasil G.
METALLURGIST , cilt.59, ss.489-497, 2015 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma

25. The Turkish Transportation Sector and Its Thermodynamic Analysis

Camdali Ü.
ENERGY SOURCES PART B-ECONOMICS PLANNING AND POLICY , cilt.10, sa.4, ss.388-396, 2015 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma

26. Exergy analysis of electricity generation for the geothermal resources using organic rankine cycle: Kizildere-denizli case

Tunc M., Sisbot S., ÇAMDALI Ü.
Environmental Progress and Sustainable Energy , cilt.32, sa.3, ss.830-836, 2013 (SCI-Expanded, Scopus)

27. Cost and exergy analysis for optimization of charging materials for steelmaking in EAF and LF as a system

Yetisken Y., Camdali Ü., Ekmekci I.
METALLURGIST , cilt.57, ss.378-388, 2013 (SCI-Expanded, Scopus)

28. An Economic Analysis of Horizontal Ground Source Heat Pumps (GSHPs) For Use in Heating and Cooling in Bolu, Turkey

Camdali Ü., Tuncel E.
ENERGY SOURCES PART B-ECONOMICS PLANNING AND POLICY , cilt.8, sa.3, ss.290-303, 2013 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma

29. The Modeling of Turkey's Electrical Energy Consumption and Production Policy Relating to the Kyoto Protocol

Sisbot S., Tunc M., Camdali Ü., Guelsan F. H.
ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS , cilt.35, sa.4, ss.380-395, 2013 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma

30. Ground temperature estimations for Bolu, Turkey

ÇAMDALI Ü., Tunc M.
Environmental Monitoring and Assessment , cilt.184, sa.6, ss.3721-3729, 2012 (SCI-Expanded, Scopus)

31. Termodinamik ve Sosyal Sistemlerin Yakın Çevre İlişkilerindeki İlginç Benzeşim, Değişim ve Bir Sonuç-Bir Ümit

ÇAMDALI Ü.
ANKARA UNIVERSITESI. SIYASAL BILGILER FAKULTESI DERGISI , 2012 (TRDizin)

32. Determination of the optimum cost function for an electric arc furnace and ladle furnace system by using energy balance

ÇAMDALI Ü., Yetişken Y., EKMEKÇİ İ.
Energy Sources, Part B: Economics, Planning and Policy , cilt.7, sa.2, ss.200-212, 2012 (SCI-Expanded, Scopus)

33. Mass analysis of an electric arc furnace (eaf) at a steel company in turkey

Tunc M., ÇAMDALI Ü., Arasil G.
Metallurgist , cilt.56, sa.3-4, ss.253-261, 2012 (SCI-Expanded, Scopus)

34. Economic analysis of photovoltaic systems for household applications in Turkey

ÇAMDALI Ü.
Energy Education Science and Technology Part A: Energy Science and Research , cilt.24, sa.2, ss.125-135, 2010 (Scopus)

35. Thermal analysis of thin multi-layer metal films during femtosecond laser heating

Karakas A., Tunc M., ÇAMDALI Ü.
Heat and Mass Transfer/Waerme- und Stoffuebertragung , cilt.46, sa.11-12, ss.1287-1293, 2010 (SCI-Expanded, Scopus)

36. Implementation and assessment of computer integrated manufacturing in systems engineering education

Şişbot S., Tunc M., ÇAMDALI Ü.
Computer Applications in Engineering Education , cilt.18, sa.1, ss.117-129, 2010 (SCI-Expanded, Scopus)

37. Optimal positioning of wind turbines on Gökçeada using multi-objective genetic algorithm

Şişbot S., Turgut Ö., Tunç M., ÇAMDALI Ü.
Wind Energy , cilt.13, sa.4, ss.297-306, 2010 (SCI-Expanded, Scopus)

38. Yeditepe university computer integrated manufacturing studies

Sisbot S., Tunc M., ÇAMDALI Ü., Turkkan Y.
Computer Applications in Engineering Education , cilt.17, sa.1, ss.1-12, 2009 (SCI-Expanded, Scopus)

39. Constructal optimisation of heat generating volumes

Karakas A., ÇAMDALI Ü., Tunç M.
International Journal of Exergy , cilt.6, sa.5, ss.637-654, 2009 (SCI-Expanded, Scopus)

40. Energy and exergy efficiencies for society

ÇAMDALI Ü., Tun ̧.
Journal of the Energy Institute , cilt.81, sa.2, ss.118-122, 2008 (Scopus)

41. Transient Temperature Analysis of Slab in Erdemir

ÇAMDALI Ü., Tunç M., Şişbot S.
Journal of Iron and Steel Research International , cilt.15, sa.2, ss.43-45, 2008 (SCI-Expanded, Scopus)

42. Optimization of fossil fuel sources: An exergy approach

ÇAMDALI Ü., Ediger V.
Energy Sources, Part A: Recovery, Utilization and Environmental Effects , cilt.29, sa.3, ss.251-259, 2007 (SCI-Expanded, Scopus)

43. Energy and exergy efficiencies in Turkish transportation sector, 1988-2004

Ediger V. Ş., ÇAMDALI Ü.
Energy Policy , cilt.35, sa.2, ss.1238-1244, 2007 (SCI-Expanded, SSCI, Scopus)

44. Mass Balance Modeling for Electric Arc Furnace and Ladle Furnace System in Steelmaking Facility in Turkey

EKMEKÇİ İ., Yetisken Y., ÇAMDALI Ü.
Journal of Iron and Steel Research International , cilt.14, sa.5, 2007 (SCI-Expanded, Scopus)

45. Electrical energy consumption and production of Turkey versus world

Tunç M., ÇAMDALI Ü., Liman T., Deǧer A.
Energy Policy , cilt.34, sa.17, ss.3284-3292, 2006 (SCI-Expanded, SSCI, Scopus)

46. The bio-heat transfer equation and its applications in hyperthermia treatments

Tunç M., ÇAMDALI Ü., Parmaksizoglu C., Çikrikçi S.
Engineering Computations (Swansea, Wales) , cilt.23, sa.4, ss.451-463, 2006 (SCI-Expanded, Scopus)

47. Comparison of Turkey's electrical energy consumption and production with some European countries and optimization of future electrical power supply investments in Turkey

Tunç M., ÇAMDALI Ü., Parmaksizoglu C.
Energy Policy , cilt.34, sa.1, ss.50-59, 2006 (SCI-Expanded, SSCI, Scopus)

48. Steady State Heat Transfer of Ladle Furnace During Steel Production Process

ÇAMDALI Ü., Tunç M.
Journal of Iron and Steel Research International , cilt.13, sa.3, 2006 (SCI-Expanded, Scopus)

49. Heat transfer analysis for industrial AC electric arc furnace

ÇAMDALI Ü., Tunç M.
Journal of Iron and Steel Research International , cilt.12, sa.4, ss.9-16, 2005 (SCI-Expanded, Scopus)

50. Computer aided mass balance analysis for AC electric arc furnace steelmaking

ÇAMDALI Ü., Tunç M.
Journal of Iron and Steel Research International , cilt.12, sa.3, ss.11-13, 2005 (SCI-Expanded, Scopus)

51. Computation of chemical exergy potential in an industrial AC electric arc furnace

ÇAMDALI Ü., Tunç M.
Journal of Energy Resources Technology, Transactions of the ASME , cilt.127, sa.1, ss.66-70, 2005 (SCI-Expanded, Scopus)

52. Determination of the optimum production parameters by using linear programming in the AC electric arc furnace

ÇAMDALI Ü.
Canadian Metallurgical Quarterly , cilt.44, sa.1, ss.103-110, 2005 (SCI-Expanded, Scopus)

53. Energy and exergy analyses in a rotary burner with pre-calcinations in cement production

ÇAMDALI Ü., Erişen A., Çelen F.
Energy Conversion and Management , cilt.45, sa.18-19, ss.3017-3031, 2004 (SCI-Expanded, Scopus)

54. Thermodynamic analysis of some industrial applications with variable ambient conditions

ÇAMDALI Ü., Tunç M.
International Journal of Thermophysics , cilt.25, sa.6, ss.1965-1979, 2004 (SCI-Expanded, Scopus)

55. Transient temperature analysis for industrial AC Arc furnace bottom

ÇAMDALI Ü., Tunç M.
Journal of Iron and Steel Research International , cilt.11, sa.6, ss.1-4, 2004 (SCI-Expanded, Scopus)

56. Thermoeconomic analysis of industrial systems

ÇAMDALI Ü., Tunç M.
Journal of the Energy Institute , cilt.77, sa.512, ss.53-58, 2004 (SCI-Expanded, Scopus)

57. Exergy analysis and efficiency in an industrial AC electric ARC furnace

ÇAMDALI Ü., Tunç M.
Applied Thermal Engineering , cilt.23, sa.17, ss.2255-2267, 2003 (SCI-Expanded, Scopus)

58. Chemical exergy analysis of two industrial systems

ÇAMDALI Ü.
Journal of the Institute of Energy , cilt.76, sa.509, ss.90-96, 2003 (SCI-Expanded, Scopus)

59. Second law analysis of thermodynamics in the electric arc furnace at a steel producing company

ÇAMDALI Ü., Tunç M., Karakaş A.
Energy Conversion and Management , cilt.44, sa.6, ss.961-973, 2003 (SCI-Expanded, Scopus)

60. Energy and exergy analysis of a ladle furnace

ÇAMDALI Ü., Tunç M.
Canadian Metallurgical Quarterly , cilt.42, sa.4, ss.439-446, 2003 (SCI-Expanded, Scopus)

61. Modelling of electric energy consumption in the AC electric arc furnace

ÇAMDALI Ü., Tunç M.
International Journal of Energy Research , cilt.26, sa.10, ss.935-947, 2002 (SCI-Expanded, Scopus)

62. Exergy balance of a general system with variation of environmental conditions and some applications

Göǧüş Y. A., ÇAMDALI Ü., Kavsaoǧlu M. Ş.
Energy , cilt.27, sa.7, ss.625-646, 2002 (SCI-Expanded, Scopus)

63. An energy analysis for a type of liquid carbon steel production in an electric arc furnace Elektrik Ark Firininda Bir Cins Sivi Karbon Çeliǧi Üretimi için Enerji Analizi

ÇAMDALI Ü., Tunç M.
Turkish Journal of Engineering and Environmental Sciences , cilt.25, sa.5, ss.545-553, 2001 (Scopus, TRDizin)

64. Thermodynamic analysis of a steel production step carried out in the ladle furnace

ÇAMDALI Ü., Tunç M., Dikeç F.
Applied Thermal Engineering , cilt.21, sa.6, ss.643-655, 2001 (SCI-Expanded, Scopus)

65. The effect of the variation of the temperature of the surroundings on thermodynamic analysis and industrial applications Thermodinamik Analizlerde Çevre Sicakliǧinin Deǧişiminin Etkisi ve Endüstriyel Uygulamalar

ÇAMDALI Ü.
Turkish Journal of Engineering and Environmental Sciences , cilt.25, sa.5, ss.537-544, 2001 (Scopus, TRDizin)
Hakemli Bilimsel Toplantılarda Yayımlanmış Bildiriler 12

1. MASS BALANCE OF AN ELECTRIC ARC FURNACE PRODUCING HIGH CARBON FERROCHROME

KAPAN S., ÇAMDALI Ü., ÇELİK N.
INTERNATIONAL EUROPEAN CONFERENCE ON INTERDISCIPLINARY SCIENTIFIC RESEARCH-VI, Romanya, 26 Ağustos 2022, (Tam Metin Bildiri)

2. SOLAR ASSISTED ABSORPTION COOLING SYSTEMTHERMOECONOMIC ANALYSIS AND EVALUATION

ÇAMDALI Ü., Akkaya M.
4th International Scientific Research Congress, 14 - 17 Şubat 2019, (Tam Metin Bildiri)

3. MARMARA BÖLGESİNİN GÜNEŞ IŞINIM EKSERJİSİ POTANSİYELİNİN VE ENERJİ-EKSERJİ DÖNÜŞÜM VERİMLİLİĞİNİNHESAPLANMASI

ÇAMDALI Ü., Özel S.
22. ISI BİLİMİ VE TEKNİĞİ KONGRESİ, 11 - 14 Eylül 2019, (Tam Metin Bildiri)

4. Investigation and Modeling Thermo-physical Properties of Soil

ÇAMDALI Ü., YALÇUK A., AKTAŞ M.
ICATES, 19 - 21 Eylül 2018, (Tam Metin Bildiri)

5. FOTOVOLTAİK SİSTEMLER KULLANARAK ELEKTRİK ÜRETEN BİR TESİSİN ENERJİ VE EKSERJİ ANALİZİ

ÇAMDALI Ü., ÖZEL S.
Anadolu Enerji Sempozyumu, 18 - 20 Nisan 2018, (Tam Metin Bildiri) Sürdürülebilir Kalkınma

6. CAVITY RECEIVER OPTIMIZATION OF THE SOLAR POWER TOWER SYSTEM

TİRYAKİ G., ÇAMDALI Ü.
2nd International Conference on Viable Energy Trends INVENT 2017, Helsinki, Finlandiya, 28 - 30 Nisan 2017, (Tam Metin Bildiri)

7. REFLECTIVITY AND EMISSIVITY EFFECTS ON THE CAVITY RECEIVERS OF THE SOLAR POWER TOWER SYSTEMS

TİRYAKİ G., ÇAMDALI Ü.
INTERNATIONAL CONFERENCE ON ENERGY AND THERMAL ENGINEERING: ISTANBUL 2017, İstanbul, Türkiye, 25 - 28 Nisan 2017, ss.423-427, (Tam Metin Bildiri)

8. ENERGY AND EXERGY ANALYSIS OF A SOLAR POWER TOWER SYSTEM WITH A CAVITY RECEIVER

TİRYAKİ G., ÇAMDALI Ü.
INTERNATIONAL CONFERENCE ON ENERGY AND THERMAL ENGINEERING: ISTANBUL 2017, İstanbul, Türkiye, 25 - 28 Nisan 2017, ss.428-434, (Tam Metin Bildiri)

9. TUBE DIAMETER OPTIMIZATION OF A CAVITY RECEIVER FOR A SOLAR POWERTOWER SYSTEM

TİRYAKİ G., ÇAMDALI Ü.
INTERNATIONAL CONFERENCE ON ENERGY AND THERMAL ENGINEERING: ISTANBUL 2017, İstanbul, Türkiye, 25 - 28 Nisan 2017, ss.435-439, (Tam Metin Bildiri)

10. Bir nükleer enerji santralinin karşılaştırılmalı maliyet analizi Akkuyu özelinde

TİRYAKİ G., ÇAMDALI Ü.
20. ULUSAL ISI BİLİMİ VE TEKNİĞİ KONGRESİ 2-5 EYLÜL 2015 (ULIBTK'15), Türkiye, 2 - 05 Eylül 2015, cilt.20, ss.346-353, (Tam Metin Bildiri)

11. Optimum charging materials for electric arc furnace EAF and Ladle Furnace LF system a simple case

YETİŞKEN Y., ÇAMDALI Ü., EKMEKCİ İ.
International Iron & SteelSymposium, 2 - 04 Ocak 2012, (Tam Metin Bildiri)

12. General exergy balance of a system with variation of environmental conditions and some applications

Göǧüş Y., ÇAMDALI Ü.
ECOS 2000 from Thermo-Economics to Sustainability, Enschede, Hollanda, cilt.2, ss.1117-1129, (Tam Metin Bildiri)
Kitaplar 1

1. Mühendisliğin Kültürümüzdeki Temelleri ve Mühendisliğe Hizmet Eden Bilim İnsanlarımız

ÇAMDALI Ü.
Düşünce ve Gelenek, M. Kazım Arıcan, Mehmet Vural, M. Enes Kala, Editör, Hece, ss.364-379, 2016
Metrikler

Yayın

79

Yayın (Scopus)

58

Atıf (Scopus)

1047

H-İndeks (Scopus)

17

Atıf (Scholar)

48

H-İndeks (Scholar)

3

Atıf (TrDizin)

1

H-İndeks (TrDizin)

1

Atıf (Diğer Toplam)

2

Proje

12

Tez Danışmanlığı

7

Açık Erişim

8
BM Sürdürülebilir Kalkınma Amaçları
SDG 2: AMAÇ 2: AÇLIĞA SON
SDG 5: AMAÇ 5: CİNSİYET EŞİTLİĞİ
SDG 6: AMAÇ 6: TEMİZ SU VE SIHHİ KOŞULLAR
SDG 7: AMAÇ 7: ERİŞİLEBİLİR VE TEMİZ ENERJİ
SDG 12: AMAÇ 12: SORUMLU ÜRETİM VE TÜKETİM