Yayınlar & Eserler

ATLAS Yayın Analitiği
Makaleler 32
Tümü (32)
SCI-E, SSCI, AHCI (24)
SCI-E, SSCI, AHCI, ESCI (25)
ESCI (1)
Scopus (24)
TRDizin (6)
Diğer Yayınlar (3)

1. Electrodeposited Ag–TiB₂ nanocomposite coatings for electrical contact applications: influence of TiB₂ content and current type on arc erosion resistance and mechanical properties

Cosmuş D., APAYDIN F., KARSLIOĞLU R.
Journal of the Australian Ceramic Society , cilt.62, sa.5, ss.2075-2090, 2026 (SCI-Expanded, Scopus)

2. Diş Protez Temizleyicilerinin Oto-Polimerize PMMA Reçinelerinin Eğilme Özellikleri Üzerindeki Etkisi: Karşılaştırmalı İn Vitro Analiz

özdoğan m. s., KARSLIOGLU R.
Afyon Kocatepe Üniversitesi Fen ve Mühendislik Bilimleri Dergisi , cilt.26, sa.1, ss.180-189, 2026 (TRDizin) Creative Commons License

3. Tribological Performance of Raft-Modified Graphene Oxide as a Lubricant Additive

Ozkan E., KARSLIOĞLU R., Karslioglu S.
Journal of Applied Polymer Science , cilt.143, sa.4, 2026 (SCI-Expanded, Scopus)

4. Effect of Pre-existing T6 Precipitates on the Recrystallization Texture, Dislocation Structure, and Corrosion Behavior of Cold-Rolled AA 6061 Alloy

Albayrak S., Salahi S., GÜL C., KARSLIOĞLU R., ÇİNİCİ H.
Metals and Materials International , 2026 (SCI-Expanded, Scopus)

5. Surface-engineered hexagonal boron nitride via RAFT-synthesized methacrylates for enhanced dispersibility and tribological performance in castor oil

Karslioglu S., Akeyshi İ., KARSLIOĞLU R.
Polymer , cilt.335, 2025 (SCI-Expanded, Scopus)

6. Elektrodepozisyon Yöntemiyle Üretilen Ag-CdO Nanokompozit Kaplamalarda CdO Miktarının Mekanik ve Elektriksel Özelliklere Etkisi

KARSLIOĞLU R., COŞMUŞ D.
JOURNAL OF POLYTECHNIC-POLITEKNIK DERGISI , 2025 (ESCI, TRDizin)

7. Effect of Current Type and Density on Tribological Properties of Electrodeposited Ni-Co/MWCNT Nanocomposite Coatings

Karslıoğlu R., Akçil M., Alp A., Akbulut H.
JOM , cilt.75, sa.12, ss.5114-5125, 2023 (SCI-Expanded, Scopus)

8. Effect of temperature on microstructure and physical properties of Zn-Al/SiC/Gr hybrid composites produced by current sintering Sıcaklık değişiminin akım sinterleme yöntemi üretilmiş Zn-Al/SiC/Gr hibrit kompozitlerin mikroyapı ve fiziksel özelliklerine etkisi

Karslıoğlu R., Akçil M., Uysal M., Bağdatlı G., Alp A., Akbulut H.
Journal of the Faculty of Engineering and Architecture of Gazi University , cilt.38, sa.4, ss.2339-2346, 2023 (SCI-Expanded, Scopus, TRDizin) Creative Commons License

9. Synthesis, Characterization, and Wear Behavior of W-DLC Films Deposited on Si Substrates

Karslıoğlu R., Meletis E. I.
Journal of Nano Research , cilt.81, ss.105-120, 2023 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma

10. Microstructural Evaluation of Graphene-Reinforced Nickel Matrix Ni-P-Gr Coating on Ti-6Al-4V Alloy by the Electroless Coating Method

Gunduz H., KARSLIOĞLU R., ÖZTÜRK F.
Coatings , cilt.12, sa.12, 2022 (SCI-Expanded, Scopus)

11. Evaluation of microstructure and mechanical properties of PMMA Matrix composites reinforced with residual YSZ from CAD/CAM Milling process

ÖZDOĞAN M. S., KARSLIOĞLU R.
International Journal of Dental Materials , cilt.3, sa.2, ss.37-44, 2021 (Hakemli Dergi) Creative Commons License

12. Electrical contact performance of various electro-deposited graphene reinforced silver-based nanocomposites

Karslioglu R., Al-Falahi L.
Materialpruefung/Materials Testing , cilt.62, sa.4, ss.401-407, 2020 (SCI-Expanded, Scopus)

13. MWCNT Oranının MWCNT ile güçlendirilmiş Al2O3 Matrisli Nanokompozitlerin Mikroyapı ve Mekanik Özelliklerine Etkisi

KARSLIOĞLU R.
Düzce Üniversitesi Bilim ve Teknoloji Dergisi , cilt.7, sa.3, ss.1922-1930, 2019 (TRDizin)

14. Akımsız Kaplama Yöntemi ile Üretilmiş Grafen Takviyeli Gümüş Matrisli Nanokompozitlerin Yapısal Özellikline Banyo Bileşiminin Etkisi

KARSLIOĞLU R.
Uluslararası Muhendislik Arastirma ve Gelistirme Dergisi , cilt.11, sa.2, ss.637-642, 2019 (TRDizin) Creative Commons License

15. Influence of current type on tribological and corrosion properties of nickel boron coatings produced by electrodeposition

Barut U., Karslioglu R.
Kovove Materialy , cilt.57, sa.3, ss.167-175, 2019 (SCI-Expanded, Scopus) Creative Commons License

16. Nano Al2O3 Oranının Ni-Co Matrisli Nano Kompozit Kaplamaların Tribolojik Özelliklerine Etkisi

KARSLIOĞLU R.
Academic Platform Journal of Engineering and Science , cilt.6, sa.2, ss.116-123, 2018 (TRDizin) Creative Commons License

17. Comparison microstructure and sliding wear properties of nickel-cobalt/CNT composite coatings by DC, PC and PRC current electrodeposition

Karslioglu R., Akbulut H.
Applied Surface Science , cilt.353, ss.615-627, 2015 (SCI-Expanded, Scopus)

18. Electrochemical performance of pulse electrodeposited Sn-Ni/MWCNT composite anode for lithium-ion batteries

Uysal M., Görmü H., Karslioglu R., Alp A., Akbulut H.
Acta Physica Polonica A , cilt.125, sa.2, ss.353-356, 2014 (SCI-Expanded, Scopus) Creative Commons License Sürdürülebilir Kalkınma

19. Tribological behaviours of hybrid Zn-Al metal matrix composites produced by a rapid current sintering technique

Karslioǧlu R., Akbulut H., Uysal M., Baǧdatli G.
Industrial Lubrication and Tribology , cilt.66, sa.3, ss.481-489, 2014 (SCI-Expanded, Scopus)

20. The Preparation of Zeolite/Ag Composite Powders by Electroless Deposition Process

Uysal M., Karslioglu R., Gul H., Aslan S., Keskin S., Okumus S., et al.
Powder Metallurgy and Metal Ceramics , cilt.53, ss.262-268, 2014 (SCI-Expanded, Scopus)

21. The preparation of core-shell Al2O3/Ni composite powders by electroless plating

Uysal M., Karslioǧlu R., Alp A., Akbulut H.
Ceramics International , cilt.39, sa.5, ss.5485-5493, 2013 (SCI-Expanded, Scopus)

22. Characteristics bronze/Al2O3(Ni) reinforcement metal matrix composite produced by current activated sintering

Uysal M., Karslioglu R., Akbulut H., Alp A.
Acta Physica Polonica A , cilt.123, sa.2, ss.235-237, 2013 (SCI-Expanded, Scopus) Creative Commons License

23. The preparation of core-shell Al2O3/Cu composite powders by electroless plating in the alkaline solution

Uysal M., Karslioglu R., Alp A., Akbulut H.
Acta Physica Polonica A , cilt.123, sa.2, ss.238-240, 2013 (SCI-Expanded, Scopus) Creative Commons License

24. Reciprocating wear behavior of Ni-Co alloys produced by pulse current electrodeposition

Karslioglu R., Uysal M., Alp A., Akbulut H.
Acta Physica Polonica A , cilt.123, sa.2, ss.424-426, 2013 (SCI-Expanded, Scopus) Creative Commons License

25. Thermal expansion and thermal conductivity behaviors of Al-Si/SiC/graphite hybrid metal matrix composites (MMCs)

Okumus S. C., Aslan S., Karslioglu R., Gultekin D., Akbulut H.
Medziagotyra , cilt.18, sa.4, ss.341-346, 2012 (SCI-Expanded, Scopus)

26. Nanostructured core-shell Ni deposition on SiC particles by alkaline electroless coating

Uysal M., Karsliolu R., Alp A., Akbulut H.
Applied Surface Science , cilt.257, sa.24, ss.10601-10606, 2011 (SCI-Expanded, Scopus)

27. The effect of substrate temperature on the electrical and optic properties of nanocrystalline tin oxide coatings produced by APCVD

Karslolu R., Uysal M., Akbulut H.
Journal of Crystal Growth , cilt.327, sa.1, ss.22-26, 2011 (SCI-Expanded, Scopus)

28. Coating Ni–Co-Multi-Walled Carbon Nanotube Metal Matrix Nanocomposites by Electrodeposition

KARSLIOĞLU R., UYSAL M., Sancar M., AKBULUT H.
Advanced Science, Engineering and Medicine , cilt.3, sa.1, ss.72-76, 2011 (Hakemli Dergi)

29. Effect of Sintering Current Density on the Production of Multi-Walled Carbon Nanotube Reinforced Bronze Matrix MMCs

KARSLIOĞLU R., UYSAL M., AKBULUT H.
Advanced Science, Engineering and Medicine , cilt.3, sa.1, ss.58-62, 2011 (Hakemli Dergi)

30. The effect of substrate temperature on the microstructural properties of nanocrystalline TiN oxide coatings produced by APCVD

Karshoǧlu R., Alp A., Akbulut H.
Journal of Coatings Technology and Research , cilt.7, sa.4, ss.503-510, 2010 (SCI-Expanded, Scopus)

31. Wear behavior of bronze hybrid MMCs coatings produced by current sintering on steel substrates

Karslioǧlu R., Uysal M., Alp A., Akbulut H.
Tribology Transactions , cilt.53, sa.5, ss.779-785, 2010 (SCI-Expanded, Scopus)

32. Rod- and wire-like morphologies of tin oxide developed with plasma oxidation after electrodeposition

Uysal M., Karslioǧlu R., Guler M., Alp A., Akbulut H.
Materials Letters , cilt.63, ss.422-424, 2009 (SCI-Expanded, Scopus)
Hakemli Bilimsel Toplantılarda Yayımlanmış Bildiriler 58

1. THE PREPARATION OF Al2O3-Ag CORE-SHELL MICROSPHERES BY USING SEED MEDIATED GROWTH ELECTROLESS PLATING

BOZKAYA M., ATEŞ H., KARSLIOĞLU R.
International Conference on Advanced Materials Science & Engineering and High Tech Devices Applications; Exhibition (ICMATSE 2022), Ankara, Türkiye, 27 - 29 Ekim 2022, ss.131-134, (Tam Metin Bildiri)

2. Effect of Graphene Addition and Heat Treatment on Microstructure and Tribological Properties of Ni-P Electroless Coating

GÜNDÜZ H., ÖZTÜRK F., KARSLIOĞLU R.
VI. International Scientific and Vocational Studies Congress – Science and Health (BILMES SH 2021), Türkiye, 23 Aralık 2021, (Özet Bildiri)

3. Effect of Reinforcement Amount on Ag-CdO Nanocomposite Coatings

COŞMUŞ D., SÜRDEM S., ATEŞ H., KARSLIOĞLU R.
5 th ASIA’ International Conference on Surfaces, Coatings and Nanostructured Materials (NANOSMAT-Asia), Ankara, Türkiye, 25 Ekim 2021, (Özet Bildiri)

4. Electrical contact performance of of Nano pariculate reinforced Ag based nanocomposite produced by electropositions

KARSLIOĞLU R.
5 th ASIA’ International Conference on Surfaces, Coatings and Nanostructured Materials (NANOSMAT-Asia), Ankara, Türkiye, 25 Ekim 2021, (Özet Bildiri)

5. Effect of Current Type on Ag-TiB2 Nanocomposite

COŞMUŞ D., SÜRDEM S., ATEŞ H., KARSLIOĞLU R.
5 th ASIA’ International Conference on Surfaces, Coatings and Nanostructured Materials (NANOSMAT-Asia), Ankara, Türkiye, 25 Ekim 2021, (Özet Bildiri)

6. CdO Reinforced Ag Based Nanocomposite Coating by Pulse and PRC Electrodeposition Method

Coşmuş D., Barut U., Sürdem S., Çankaya G., Ateş H., Karslıoğlu R.
Int. Conf. Advanced. Mater. Sci.& Eng. HiTech. and Device Appl., Ankara, Türkiye, 2 - 04 Ekim 2020, ss.218-219, (Özet Bildiri)

7. Titanium Diboride (TiB2) Reinforced Silver Based Nanocomposite Coatings with Electrodeposition Method

Coşmuş D., Barut U., Sürdem S., Çankaya G., Ateş H., Karslıoğlu R.
Int. Conf. Advanced. Mater. Sci.& Eng. HiTech. and Device Appl. , Ankara, Türkiye, 2 - 04 Ekim 2020, ss.208-209, (Özet Bildiri)

8. Microstructural, Surface and Electrochemical Properties of Electrodeposited Ni-B/B4C NanocompositeCoatings

BARUT U., SÜRDEM S., KARSLIOĞLU R.
Advanced Materials Science and Engineering and High Tech Device Applications (ICMATSE), Ankara, Türkiye, 2 - 04 Ekim 2020, (Özet Bildiri)

9. Synthesis and Characterization of Ni-Co/hBN Nanocomposite Coatings Prepared by One-Step Electrodeposition at Different Duty Cycles

BARUT U., KARSLIOĞLU R.
International Conference on Advanced Materials Science Engineeringand High Tech Devices Applications Exhibition (ICMATSE 2020), Ankara, Türkiye, 2 - 04 Ekim 2020, ss.198, (Özet Bildiri)

10. Fabrication and Characterization of Graphene Reinforced Ni-B Nanocomposite Coatings Produced byElectrodeposition

BARUT U., SÜRDEM S., KARSLIOĞLU R.
Advanced Materials Science and Engineering and High Tech Device Applications (ICMATSE), Ankara, Türkiye, 2 - 04 Ekim 2020, (Özet Bildiri)

11. Elektrodepoziyon Yöntemi Kullanılarak Üretilmiş Ni-Co/MWCNT Nano Kompozit Kapamasının Mikro Yapı ve Mekanik Özeliklerine MWCNT Konsantrasyonunun Etkisi

KARSLIOĞLU R., AKBULUT H.
IATENS 2019, 4 - 06 Ekim 2019, ss.798-801, (Tam Metin Bildiri)

12. Effect of Amount of Multi-Walled Carbon Nanotube on Ni-B/Multi-Walled Carbon Nanotube Nanocomposite Coatings Produced by Electrodeposition

Barut U., Karslıoğlu R.
The 5th International Conference on Engineering Sciences, Ankara, Türkiye, 19 - 20 Eylül 2019, ss.95, (Özet Bildiri)

13. Effect of Amount Of Multi-Walled CarbonNanotube On Ni-B/Multi-Walled CarbonNanotube Nanocomposite Coatings ProducedBy Electrodeposition

BARUT U., KARSLIOĞLU R.
5th International Conferences on Engineering Sciences, 19 Eylül 2019, ss.95, (Özet Bildiri)

14. MWCNT Reinforcement Silver Based Nanocomposite by Electrodeposition

BARUT U., KARSLIOĞLU R.
5th International Conferences on Engineering Sciences, 19 Eylül 2019, ss.94, (Özet Bildiri)

15. Effect of Graphene Concentration on Ni-B/Graphene Nanocomposite Coating Produced by Electrodeposition

Barut U., Karslıoğlu R.
The 5th International Conference on Engineering Sciences, 19 September, Ankara, Türkiye, 19 - 20 Eylül 2019, ss.94, (Özet Bildiri)

16. Farklı Akım Türlerinin α-Al2O3 Takviyeli Gümüş Matrisli Nano Kompozit Kaplamaların Mikroyapısına Etkileri

Barut U., Kalkan Z., Gürcan E., Karslıoğlu R.
1st International Conference on Advances in Mechanical and Mechatronics Engineering (ICAMMEN 2018) , Ankara, Türkiye, 8 - 09 Kasım 2018, ss.20, (Özet Bildiri)

17. NiSO4.6H2O / CoSO4.7H2O ORANININ Ni-Co KAPLAMALARIN YAPISAL ÖZELLİKLERİNE ETKİLERİ

KARSLIOĞLU R., AKBULUT H.
1st International Conference on Advances in Mechanical and Mechatronics Engineering ICAMMEN 2018, 8 - 09 Kasım 2018, ss.486-490, (Tam Metin Bildiri)

18. FARKLI AKIM TÜRLERİNİN α-Al2O2 TAKVİYELİ GÜMÜŞ MATRİSLİ NANO KOMPOZİT KAPLAMALARIN MİKROYAPISINA ETKİLERİ

Kalkan Z., GÜRCAN E., BARUT U., KARSLIOĞLU R.
1st International Conference on Advances in Mechanical and Mechatronics Engineering ICAMMEN 2018, 8 - 09 Kasım 2018, ss.20, (Özet Bildiri)

19. Effect of SiC Ratio in to Ag Matrix nanocomposite on Electrical contact performance produced by electrodepositions

KARSLIOĞLU R., GÜRCAN E.
13th International Conference on Surfaces, Coatings andNanostructured Materials, Gdansk, Polonya, 11 - 14 Eylül 2018, ss.21, (Özet Bildiri)

20. Electrical contact performance of Nano SiC reinforced Ag produced by electrodepositions

KARSLIOĞLU R.
13th International Conference on Surfaces, Coatings and Nanostructured Materials, Gdansk, Polonya, 11 - 14 Eylül 2018, (Özet Bildiri)

21. EFFECT OF SIC RATIO ON SIC REINFORCED AG MATRIXNANOCOMPOSITE COATINGS BY ELECTRODEPOSITION

KARSLIOĞLU R., GÜRCAN E.
IV. International Ege Composite Materials Symposium KOMPEGE 2018, 6 - 08 Eylül 2018, ss.104, (Özet Bildiri)

22. EFFECT OF CURRENT TYPE ON SIC REINFORCED AG MATRIXNANOCOMPOSITE COATINGS BY ELECTRODEPOSITION

KARSLIOĞLU R., GÜRCAN E.
IV. International Ege Composite Materials Symposium KOMPEGE 2018, 6 - 08 Eylül 2018, ss.20, (Özet Bildiri)

23. Effect of Current Type on Tribological Properties of Nickel BoronCoatings Produced by Electrodeposition

BARUT U., GÜRCAN E., KARSLIOĞLU R., OKUYUCU H.
2nd International Conference on Tribology - TURKEYTRIB’xx18, 18 - 20 Nisan 2018, (Özet Bildiri)

24. Effect of Nano SiC amounts on Tribological properties of Ni-B-Co Based Nano Composite Coatings Produced by Electrodeposition

BARUT U., GÜRCAN E., KARSLIOĞLU R., OKUYUCU H.
2nd International Conference on Tribology - TURKEYTRIB’xx18, 18 - 20 Nisan 2018, (Özet Bildiri)

25. Effect of Different Current Type on Tribological properties of Ni-B-Co/SiC Nano Composite Coatings Produced by Electrodeposition

BARUT U., GÜRCAN E., KARSLIOĞLU R., OKUYUCU H.
2nd International Conference on Tribology - TURKEYTRIB’xx18, 18 - 20 Nisan 2018, (Özet Bildiri)

26. Effect of Different Current Type on Tribological Properties of Ni-B-Co/SiC Nano Composite Coatings Produced by Electrodeposition

Barut U., Gürcan E., Karslıoğlu R., Okuyucu H.
2nd International Conference on Tribology (TurkeyTrib’18), İstanbul, Türkiye, 18 - 20 Nisan 2018, ss.57, (Özet Bildiri)

27. Effect of Nano SiC Amounts on Tribological properties of Ni-B-Co Based Nano Composite Produced by Electrodeposition

Barut U., Karslıoğlu R., Okuyucu H.
2nd International Conference on Tribology (TurkeyTrib’18), İstanbul, Türkiye, 18 - 20 Nisan 2018, ss.56, (Özet Bildiri)

28. Effect of Current Type on Tribological Properties of Nickel Boron Coatings Produced by Electrodeposition

Barut U., Gürcan E., Karslıoğlu R., Okuyucu H.
2nd International Conference on Tribology (TurkeyTrib’18), İstanbul, Türkiye, 18 - 20 Nisan 2018, ss.55, (Özet Bildiri)

29. Graphene Reinforcement Silver Nanocomposite Electrodeposition for Electrical Contact Materials

BARUT U., KARSLIOĞLU R., ÖKTEM M. F., OKUYUCU H.
1st International Symposium on Light Alloys and Composite Materials (ISLAC ’xx18), Karabük, Türkiye, 22 - 24 Mart 2018, ss.146, (Özet Bildiri)

30. Graphene Reinforcement Silver Nano Composite by Electroless Deposition

BARUT U., KARSLIOĞLU R., ÖKTEM M. F., OKUYUCU H.
1st International Symposium on Light Alloys and Composite Materials (ISLAC ’xx18), Karabük, Türkiye, 22 - 24 Mart 2018, ss.213, (Özet Bildiri)

31. Synthesis of Nano Al2O3 Reinforcement Ni-Based Nanocomposite Coating by Electroless Deposition Technique

BARUT U., KARSLIOĞLU R., ÖKTEM M. F., OKUYUCU H.
1st International Symposium on Light Alloys and Composite Materials (ISLAC ’xx18), Karabük, Türkiye, 22 - 24 Mart 2018, ss.398, (Özet Bildiri)

32. MWCNT REINFORCEMENT SILVER BASED NANOCOMPOSITE BY ELECTRODEPOSITION

BARUT U., KARSLIOĞLU R., ÖKTEM M. F., OKUYUCU H.
1st International Symposium on Light Alloys and Composite Materials (ISLAC ’xx18), Karabük, Türkiye, 22 - 24 Mart 2018, ss.356, (Özet Bildiri)

33. Carbon Nanotube Reinforced Silver Matrix Nano Composite Coatings by Electroless Deposition

BARUT U., KARSLIOĞLU R., ÖKTEM M. F., OKUYUCU H.
1st International Symposium on Light Alloys and Composite Materials (ISLAC ’xx18), Karabük, Türkiye, 22 - 24 Mart 2018, ss.111, (Özet Bildiri)

34. Characteristics of Nickel Boron Electrodeposition Coatings prepared by Different Current Type

BARUT U., KARSLIOĞLU R., ÖKTEM M. F., OKUYUCU H.
1st International Symposium on Light Alloys and Composite Materials (ISLAC ’xx18), Karabük, Türkiye, 22 - 24 Mart 2018, ss.192, (Özet Bildiri)

35. Synthesis of Nano Al2O3 Reinforcement Ni-Based Nanocomposite Coating by Electroless Deposition Technique

Barut U., Karslıoğlu R., Öktem M. F., Okuyucu H.
1st International Symposium on Light Alloys and Composite Materials (ISLAC ’18), Karabük, Türkiye, 22 - 24 Mart 2018, ss.398, (Özet Bildiri)

36. Characteristics of Nickel Boron Electrodeposition Coatings prepared by Different Current Type

Barut U., Karslıoğlu R., Okuyucu H., Öktem M. F.
1st International Symposium on Light Alloys and Composite Materials (ISLAC18), Karabük, Türkiye, 22 - 24 Mart 2018, ss.192, (Özet Bildiri)

37. Graphene Reinforcement of Copper Metal Matrix Nanocomposite Coatings on Low Carbon Steel by Different Electrodeposition Methods

GÜRCAN E., KARSLIOĞLU R., OKUYUCU H., İNAN A., YÜCE H. H., TAŞTEKİN F.
Internatıonal Materıals Technologıes And Metallurgy Conference 2017, 26 - 27 Ekim 2017, (Tam Metin Bildiri)

38. Copper-Graphene Composite Coating with Different Amount of Graphene on Low Carbon Steel by Electrodeposition

TAŞTEKİN F., KARSLIOĞLU R., OKUYUCU H., İNAN A., YÜCE H. H., GÜRCAN E.
Internatıonal Materıals Technologıes And Metallurgy Conference 2017, 26 Eylül - 27 Ekim 2017, (Tam Metin Bildiri)

39. Nano Sıze AL2O3 Reınforcement Ni-Co Nanocomposıte By Electrodeposıtıon

KARSLIOĞLU R., OKUYUCU H.
Internatıonal Materıals Technologıes And Metallurgy Conference 2017, 26 - 27 Eylül 2017, (Tam Metin Bildiri)

40. Effect of Gun Power on Microstructural and Tribological Properties of Tungsten Reinforced Carbon Coatings Produced by Chemical and Physical Deposition

KARSLIOĞLU R., meletis E. I.
5thIC4N2016, 23 - 30 Haziran 2016, (Özet Bildiri)

41. Electro Co Deposition Of Ni Co Cnt Nanocomposites For Tribological and Soft Magnetic Applications

KARSLIOĞLU R., AKBULUT H.
ICMCTF 42, Sen Diego/California, Amerika Birleşik Devletleri, 20 - 24 Nisan 2015, (Özet Bildiri)

42. Electro Co-Deposition Of Ni-Co/Cnt Nanocomposites For Tribological and Soft Magnetic Applications

KARSLIOĞLU R., AKBULUT H.
45th International Conference on Metallurgical Coatings and Thin Films (ICMCTF-45), San Diego, CA, Amerika Birleşik Devletleri, 20 - 24 Nisan 2015, (Özet Bildiri)

43. Demir-Çelik Üretiminde Çevre Sorunları ve Çözüm Önerileri

AKÇİL M., KARSLIOĞLU R.
Uluslararası çevre sempozyumu, 24 - 26 Ekim 2013, (Tam Metin Bildiri)

44. Metalik Madenlerin İşlenmesinde Pirometalurjik Prosesler Yerine Daha Çevreci Proseslerinin Kullanımının Yaygınlaşması ve Önemi

KARTAL M., Altay F. M., UYSAL M., GÜL H., KARSLIOĞLU R., ALP A.
Uluslararası Çevre Sempozyumu, 24 - 26 Ekim 2013, (Tam Metin Bildiri)

45. Reciprocating wear behavior of Ni-Co alloys produced by D.C. current electrodeposition

KARSLIOĞLU R., UYSAL M., ALP A., AKBULUT H.
Apmas 2013, 24 - 28 Nisan 2013, (Özet Bildiri)

46. Effect of Particle Size on Wet Tribological Properties Of Al-Si/SiC MMCs

AKÇİL M., KARSLIOĞLU R., UYSAL M., ASLAN S., ALP A., AKBULUT H.
Apmas 2013, 24 - 28 Nisan 2013, (Özet Bildiri)

47. A comparative wear study on Al-Li and Al-Li/SiC composite

Okumus S. C., Karslioglu R., Akbulut H.
3rd International Advances in Applied Physics and Materials Science Congress, APMAS 2013, Antalya, Türkiye, 24 - 28 Nisan 2013, cilt.1569, ss.360-363, (Tam Metin Bildiri)

48. Wear mechanisms of bronze matrix composites reinforced with core shell Ni coated Al2O3 particles produced by rapid current sintering technique

Uysal M., Karslioǧlu R., Alp A., Akbulut H.
15th European Conference on Composite Materials: Composites at Venice, ECCM 2012, Venice, İtalya, 24 - 28 Haziran 2012, (Tam Metin Bildiri)

49. Self lubricating effect of wet tribological behaviour of Al-Si/SiC MMCs

Karslioǧlu R., Uysal M., Aslan S., Akbulut H.
15th European Conference on Composite Materials: Composites at Venice, ECCM 2012, Venice, İtalya, 24 - 28 Haziran 2012, (Tam Metin Bildiri)

50. Recıprocatıng Wear Behavior of MWCNTs Reınforced Ni-Co Metal Matrix Composıtes Produced by Electrodeposition

KARSLIOĞLU R., UYSAL M., AKBULUT H.
6th International Conference on Surfaces, Coatings and Nanostructured Materials (NANOSMAT), Krakow, Polonya, 17 - 20 Ekim 2011, (Özet Bildiri)

51. SiCp Takviyeli Za-Al Matriksli Metal Matriksli Kompozit Malzemeleri Akım Sinterleme Yöntemiyle Üretilmesi

KARSLIOĞLU R., UYSAL M., AKBULUT H.
6th INTERNATIONAL POWDER METALLURGY CONFERENCE EXHIBITION, 5 - 09 Ekim 2011, (Tam Metin Bildiri)

52. Akım Destekli Sinterleme Yöntemi İle Üretilen SiCp Takviyeli Bronz Matriksli MMK’in Karakterizasyonu

UYSAL M., KARSLIOĞLU R., ALP A., AKBULUT H.
6th International Powder Metallurgy Conference, 5 - 09 Ekim 2011, (Tam Metin Bildiri)

53. Akım Destekli Sinterleme Yöntemi ile Üretilen Al2O3 Takviyeli Bronz Matriksli MMK’in Karakterizasyonu

UYSAL M., KARSLIOĞLU R., ALP A., AKBULUT H.
6th International Powder Metallurgy Conference, 5 - 09 Ekim 2011, (Tam Metin Bildiri)

54. ProductIon of MWCNT ReInforced Bronze Matrix ComposIte By Current ActIvated SinterIng

KARSLIOĞLU R., UYSAL M., Yazıcı Ö. F., AKBULUT H.
6th International Powder Metallurgy Conference, 5 - 09 Ekim 2011, (Tam Metin Bildiri)

55. AKIM DESTEKLİ SİNTERLEME YÖTEMİ İLE ÜRETİLEN SiCP TAKVİYELİ BRONZ MATRİKSLİ MMK’LARIN AŞINMA DAVRANIŞLARI

KARSLIOĞLU R., SANCAR M., UYSAL M., AKBULUT H.
13th International Materials Symposium (IMSP’2010), 13 - 15 Ekim 2010, (Tam Metin Bildiri) Sürdürülebilir Kalkınma

56. THE EFFECT OF SUBSTRATE TEMPERATURE ON ELECTRICAL PROPERTIES OF NANOSTRUCTURED SnO2 COATINGS

KARSLIOĞLU R., UYSAL M., AKBULUT H.
5th Nanoscience and Nano Technology Conference, Türkiye, 8 - 12 Haziran 2009, (Özet Bildiri)

57. Thin Film Nanostructured Ni Globules Deposition on SiC Particles by Basic Electroless Coating Method

UYSAL M., KARSLIOĞLU R., ALP A., AKBULUT H.
5th Nanoscience and Nano Technology Conference, Türkiye, 8 - 12 Haziran 2009, (Özet Bildiri)

58. CVD nano-crystalline tin oxide coatings on glass substrate: The effect of substrate temperature

Karslioǧlu R., Akbulut H., Alp A.
ASME 2nd Multifunctional Nanocomposites and Nanomaterials Conference, MN2008, Sharm El Sheikh, Mısır, 11 - 13 Ocak 2008, ss.157-165, (Tam Metin Bildiri)
Metrikler

Yayın

90

Yayın (Scopus)

28

Atıf (Scopus)

361

H-İndeks (Scopus)

7

Atıf (Scholar)

129

H-İndeks (Scholar)

6

Proje

13

Tez Danışmanlığı

6

Açık Erişim

15
BM Sürdürülebilir Kalkınma Amaçları
SDG 3: AMAÇ 3: SAĞLIKLI BİREYLER
SDG 7: AMAÇ 7: ERİŞİLEBİLİR VE TEMİZ ENERJİ
SDG 9: AMAÇ 9: SANAYİ, YENİLİKÇİLİK VE ALTYAPI