Prof. Dr. FERHAT KADIOĞLU

Yayın Ağı

Makaleler 39

1. Assembly of Thermoplastic Composites in the Single Strap Joint Configuration Subjected to Tensile Loading

KADIOĞLU F.

Polymer Composites , cilt.47, sa.12, ss.11355-11363, 2026 (SCI-Expanded, Scopus)

2. Assembly of thermoplastic composites the single strap joint configuration under bending

KADIOĞLU F.

Journal of Composite Materials , cilt.60, sa.15, ss.1421-1432, 2026 (SCI-Expanded, Scopus)

3. Structural and damping performance of the adhesively-bonded single lap joints with laminated composite adherends

KADIOĞLU F.

Journal of Composite Materials , cilt.60, sa.4, ss.321-334, 2026 (SCI-Expanded, Scopus)

4. How Do High-Velocity Impacts Affect Adhesive Bonding?

KADIOĞLU F.

Assembly , cilt.69, sa.2, 2026 (Scopus)

5. Residual Strength of Adhesively Bonded Joints Under High-Velocity Impact: Experimental and Numerical Investigation of Impact-Induced Degradation

KADIOĞLU F., Demiral M., Mamedov A.

Eng , cilt.7, sa.1, 2026 (ESCI, Scopus)

6. Residual strength and failure evolution of adhesively bonded joints under successive ballistic impacts

Demiral M., KADIOĞLU F.

Engineering Failure Analysis , cilt.182, 2025 (SCI-Expanded, Scopus)

7. Improving healing capability of the thermoplastic composites reinforced with carbon fibres in a Single Lap Joint (SLJ) using a co-cured method

KADIOĞLU F.

International Journal of Lightweight Materials and Manufacture , cilt.8, sa.3, ss.385-392, 2025 (Scopus)

8. Design of adhesively-bonded single lap joints for automotive applications under compressive loading

KADIOĞLU F., Demiral M.

Results in Engineering , cilt.25, 2025 (ESCI, Scopus)

9. Analysis of Fatigue Performance of Spot-Welded Steel T-Profiles Under Cyclic Torsional Loading

Demiral M., KADIOĞLU F.

Applied Sciences (Switzerland) , cilt.14, sa.22, 2024 (SCI-Expanded, Scopus)

10. Bending of fusion-bonded thermoplastic single lap joints

Liechti K., KADIOĞLU F.

Engineering Failure Analysis , cilt.165, 2024 (SCI-Expanded, Scopus)

11. Numerical and experimental 3-point bending quasi-static flexural behavior of single-strap joints joined using AF163-2K adhesive films

Etri H. E., POLAT M. Z., KADIOĞLU F.

Journal of Adhesion , cilt.100, sa.16, ss.1595-1622, 2024 (SCI-Expanded, Scopus)

12. Damage Characteristics of a Step Lap Joint Exposed to Flexural Loading for Its Different Configurations

Demiral M., KADIOĞLU F.

Polymers , cilt.15, sa.11, 2023 (SCI-Expanded, Scopus)

13. Yüksek seviyeli gürültü ve titreşim için sandviç tasarımları

Kadioglu F., Polat M. Z.

JOURNAL OF REINFORCED PLASTICS AND COMPOSITES , cilt.00, sa.00, ss.1-10, 2023 (SCI-Expanded, Scopus)

14. Mechanical and dynamic responses of unidirectional/woven carbon fiber reinforced thermoset and thermoplastic composites after low velocity impact

Kayaaslan M., Coskun T., Sahin O. S., Unlu U. M., KADIOĞLU F.

Polymers and Polymer Composites , cilt.30, 2022 (SCI-Expanded, Scopus)

15. Damping contribution of the glass reinforced aluminum laminates epoxy to the aluminum-basedsandwich structures

KADIOĞLU F., Alaboyun O. Z.

Journal of Sandwich Structures and Materials , cilt.24, sa.3, ss.1611-1628, 2022 (SCI-Expanded, Scopus)

16. Effects of compressive applied load on the adhesive single lap joint with different parameters

KADIOĞLU F.

Journal of Adhesion , cilt.98, sa.4, ss.390-411, 2022 (SCI-Expanded, Scopus)

17. Mechanical behaviour of adhesively single lap joint under buckling conditions

KADIOĞLU F.

Chinese Journal of Aeronautics , cilt.34, sa.2, ss.154-164, 2021 (SCI-Expanded, Scopus)

18. Size effect in flexural behaviour of unidirectional GFRP composites

Demiral M., KADIOĞLU F., Silberschmidt V. V.

Journal of Mechanical Science and Technology , cilt.34, sa.12, ss.5053-5061, 2020 (SCI-Expanded, Scopus)

19. Contribution of carbon nanotubes to vibration damping behavior of epoxy and its carbon fiber composites

Avil E., KADIOĞLU F., KAYNAK C.

Journal of Reinforced Plastics and Composites , cilt.39, sa.7-8, ss.311-323, 2020 (SCI-Expanded, Scopus)

20. Effects of overlap length on the strength of bolted, bonded and hybrid single lap joints with different adherend materials and thicknesses

Kadioglu F., Demiral M., El Zaroug M.

Journal of Adhesion Science and Technology , cilt.33, sa.20, ss.2191-2206, 2019 (SCI-Expanded, Scopus)

21. Failure behaviour of the single lap joints of angle-plied composites under three point bending tests

Kadioglu F., Demiral M.

Journal of Adhesion Science and Technology , 2019 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma

22. Failure behaviour of the adhesive layer and angle ply composite adherends in single lap joints: A numerical study

DEMİRAL M., Kadioglu F.

International Journal of Adhesion and Adhesives , cilt.87, ss.181-190, 2018 (SCI-Expanded, Scopus)

23. Experimental and numerical investigation into strength of bolted, bonded and hybrid single lap joints: Effects of adherend material type and thickness

El Zaroug M., Kadioglu F., Demiral M., Saad D.

International Journal of Adhesion and Adhesives , cilt.87, ss.130-141, 2018 (SCI-Expanded, Scopus)

24. Investigation of the glass transition temperature and damping of an acrylic/epoxy bonding tape using the peak damping method

Kadioglu F., Adams R. D.

Journal of Adhesion , cilt.94, sa.13, ss.1067-1081, 2018 (SCI-Expanded, Scopus)

25. Effects of Different Overlap Lengths and CompositeAdherend Thicknesses on the Performance ofAdhesively-Bonded Joints under Tensile and BendingLoadings

KADIOĞLU F., AVİL E., ERCAN M. E., AYDOĞAN T.

Journal of Materials Science and Engineering A , cilt.8, ss.76-83, 2018 (Hakemli Dergi)

26. Effects of Different Fiber Orientations on the ShearStrength Performance of Composite Adhesive Joints

KADIOĞLU F., PÜSKÜL H.

Journal Of Adhesion , cilt.10, sa.1, ss.58-65, 2016 (SCI-Expanded, Scopus)

27. Flexible adhesives for automotive application under impact loading

Kadioglu F., Adams R. D.

International Journal of Adhesion and Adhesives , cilt.56, ss.73-78, 2015 (SCI-Expanded, Scopus)

28. Non-linear analysis of a ductile adhesive in the single lap joint under tensile loading

Kadioglu F., Adams R.

Journal of Reinforced Plastics and Composites , cilt.28, sa.23, ss.2831-2838, 2009 (SCI-Expanded, Scopus)

29. Application of Vibrating Beam Method to Determine Dynamic Properties of Flexible Adhesives

Kadioglu F., Adams R.

Journal of Reinforced Plastics and Composites , cilt.28, sa.22, ss.2717-2727, 2009 (SCI-Expanded, Scopus)

30. Measurement of dynamic properties of composites in vibration by means of a non-contact mechanism

Kadioglu F.

Journal of Reinforced Plastics and Composites , cilt.28, sa.12, ss.1459-1467, 2009 (SCI-Expanded, Scopus)

31. The effect of temperature increase on the stress concentrations of adhesive joints

Kadioglu F., Es-Souni M., Hinisliouglu S.

Journal of Advanced Materials , cilt.37, sa.3, ss.21-24, 2005 (SCI-Expanded, Scopus)

32. The lap joint performance of a structural bonding tape

Kadioglu F., Adams R.

Journal of Advanced Materials , cilt.36, sa.2, ss.22-26, 2004 (SCI-Expanded, Scopus)

33. Use of thin adherends in adhesively bonded joints under different loading modes

Kadioglu F., Es-Souni M.

Science and Technology of Welding and Joining , cilt.8, sa.6, ss.437-442, 2003 (SCI-Expanded, Scopus)

34. Finite element analysis of adhesive joints in four-point bending load

Ozel A., Kadioglu F., ŞEN S., SADELER R.

Journal of Adhesion , cilt.79, sa.7, ss.683-697, 2003 (SCI-Expanded, Scopus)

35. The strength in the weakness

Kadioglu F., Ozel A., SADELER R., Adams R.

Journal of Advanced Materials , cilt.35, sa.3, ss.47-51, 2003 (SCI-Expanded, Scopus)

36. Some considerations on the adhesively-bonded joints under environmental conditions

Kadioglu F.

Journal of Advanced Materials , cilt.35, sa.2, ss.61-65, 2003 (SCI-Expanded, Scopus)

37. Tensile stress-strain behaviour of a structural bonding tape

Kadioglu F., Adams R.

Journal of Adhesion Science and Technology , cilt.16, sa.2, ss.179-195, 2002 (SCI-Expanded, Scopus)

38. Use of the thick adherend shear test for shear stress-strain measurements of stiff and flexible adhesives

Kadioglu F., Vaughn L., Guild F., Adams R.

Journal of Adhesion , cilt.78, sa.5, ss.355-381, 2002 (SCI-Expanded, Scopus)

39. Shear stress-strain behaviour of low-modulus structural adhesives

Kadioglu F., Adams R., Guild F.

Journal of Adhesion , cilt.73, ss.117-133, 2000 (SCI-Expanded, Scopus)

Hakemli Bilimsel Toplantılarda Yayımlanmış Bildiriler 28

1. Experimental Investigation on Tensile Property of Carbon Reinforced Composite Produced with Vacuum Bagging

KADIOĞLU F., Nugayoglu E., Sahin Y., Kadioglu F.

6th International Conference on Technology, ICONTECH 2026, Budapest, Macaristan, 5 - 08 Şubat 2026, cilt.39, ss.1-8, (Tam Metin Bildiri)

2. Yüksek Titreşim ve Gürültü Koşulları için Sandviç Yapıların Tasarımı

Polat M. Z., Kadioğlu F.

AIAA SCITECH 2023 Forum, Maryland, Amerika Birleşik Devletleri, 23 Ocak 2023, (Tam Metin Bildiri)

3. Sınır Koşullarının Katı Yapıların Dinamik Değerleri Üzerindeki Etkileri

Kadioğlu F., Polat M. Z., Günay A. R.

World Academy of Science, Engineering and Technology, New York, Amerika Birleşik Devletleri, 02 Ocak 2023, cilt.17, (Tam Metin Bildiri)

4. Experimental and Numerical Vibration Analysis of GLARE Beams

POLAT M. Z., KADIOĞLU F., Etri H. E.

10th International Conference on Recent Advances in Air and Space Technologies, RAST 2023, İstanbul, Türkiye, 7 - 09 Haziran 2023, (Tam Metin Bildiri)

5. Mechanical Behaviour of Adhesively Bonded Single Strap Joints under Three-Point Bending Loading

Etri H. E., KADIOĞLU F., POLAT M. Z.

10th International Conference on Recent Advances in Air and Space Technologies, RAST 2023, İstanbul, Türkiye, 7 - 09 Haziran 2023, (Tam Metin Bildiri)

6. Effects of different fiber orientations on the dynamic response of the glare FML beams

Ciftci U., KADIOĞLU F.

SAMPE 2021 Conference and Exhibition, Virtual Online, 29 Haziran - 01 Temmuz 2021, cilt.2021-June, ss.284-294, (Tam Metin Bildiri)

7. Dynamic performance of adhesively bonded single lap joints with different fiber angle orientations of adherends

Buse Karaahmet S., KADIOĞLU F.

36th Technical Conference of the American Society for Composites 2021: Composites Ingenuity Taking on Challenges in Environment-Energy-Economy, ASC 2021, Texas, Amerika Birleşik Devletleri, 20 - 22 Eylül 2021, cilt.2, ss.1219-1229, (Tam Metin Bildiri)

8. Dynamic behavior of FML/aluminum honeycomb sandwich structures using vibrating beam technique

Alaboyun O. Z., KADIOĞLU F.

SAMPE 2021 Conference and Exhibition, Virtual Online, 29 Haziran - 01 Temmuz 2021, cilt.2021-June, ss.234-245, (Tam Metin Bildiri)

9. The straps with different fiber orientations affecting the dynamic behavior of the single strap joints

Unver E., KADIOĞLU F., Ercan M. E.

SAMPE 2021 Conference and Exhibition, Virtual Online, 29 Haziran - 01 Temmuz 2021, cilt.2021-June, ss.272-283, (Tam Metin Bildiri)

10. High damping values of sandwich structures with polymer composite face sheets and foam cores

Aydogan T., KADIOĞLU F., Dalfesoglu M. E.

11. Mechanical behavior of adhesively-bonded joints under high loading rates

Ercan M. E., KADIOĞLU F.

12. Investigation of the effect of taper stacking location on drag force for onera m6 wing

Kaya M., Elfarra M., Kadioglu F.

AIAA Scitech Forum, 2019, California, Amerika Birleşik Devletleri, 7 - 11 Ocak 2019, (Tam Metin Bildiri)

13. Investigation of dynamic properties of a polymer matrix composite with different angles of fiber orientations

Kadioglu F., Coskun T., Elfarra M.

2018 5th Global Conference on Polymer and Composite Materials, PCM 2018, Kitakyushu, Japonya, 10 - 13 Nisan 2018, cilt.369, (Tam Metin Bildiri)

14. Effects of different overlap lengths and composite adherend thicknesses on the performance of adhesively-bonded joints under tensile and bending loadings

Kadioglu F., Avil E., Ercan M. E., Aydogan T.

2018 5th Global Conference on Polymer and Composite Materials, PCM 2018, Kitakyushu, Japonya, 10 - 13 Nisan 2018, cilt.369, (Tam Metin Bildiri)

15. Experimental and Numerical Investigation of Adhesively Bonded Single Lap Joints of Laminated Composite Materials

DEMİRAL M., KADIOĞLU F., ELFARRA M.

5th Global Conference on Polymer and Composite Materials, Japonya, 10 - 13 Nisan 2018

16. Investigation of dynamic properties of a polymer matrix composite with different angles of fiber orientation

KADIOĞLU F., Coşkun T., ELFARRA M.

5th Global Conference on Polymer and Composite Materials, Japonya, 10 - 13 Nisan 2018, (Tam Metin Bildiri)

17. Experimental and numerical investigation of adhesively bonded single lap joints of laminated composite materials

KADIOĞLU F., DEMİRAL M., ELFARRA M.

PCM2018, Kitakyushu, Japonya, 10 - 13 Nisan 2018, (Özet Bildiri)

18. Experimental and numerical investigation of adhesively bonded single lap joints of laminated composite materials

KADIOĞLU F., DEMİRAL M., ELFARRA M.

PCM2018, Kitakyushu, Japonya, 10 - 13 Nisan 2018, (Özet Bildiri)

19. A parametric CFD study for the effect of taper/twist stacking point location on the torque of NREL VI wind turbine rotor blade

Kaya M., Elfarra M., Kadioglu F.

Wind Energy Symposium, 2018, Florida, Amerika Birleşik Devletleri, 8 - 12 Ocak 2018, (Tam Metin Bildiri)

20. Performance of adhesively-bonded joints of laminated composite materials under different loading modes

KADIOĞLU F., Demiral M., Avil E., Ercan M. E., Aydoğan T.

AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, 2018, Florida, Amerika Birleşik Devletleri, 8 - 12 Ocak 2018, (Tam Metin Bildiri)

21. A parametric cfd study for the effect of spanwise parabolic chord distribution on the thrust of an untwisted helicopter rotor blade

Elfarra M., Kaya M., Kadioglu F.

AIAA Aerospace Sciences Meeting, 2018, Florida, Amerika Birleşik Devletleri, 8 - 12 Ocak 2018, (Tam Metin Bildiri)

Metrikler

Yayın

Yayın (Scopus)

Atıf (Scopus)

564

H-İndeks (Scopus)

Atıf (Scholar)

H-İndeks (Scholar)

Proje

Tez Danışmanlığı

Açık Erişim

BM Sürdürülebilir Kalkınma Amaçları

Yayınlar & Eserler

Yayın

Yayın (Scopus)

Atıf (Scopus)

H-İndeks (Scopus)

Atıf (Scholar)

H-İndeks (Scholar)

Proje

Tez Danışmanlığı

Açık Erişim