Doç. Dr. YASİN SARIKAVAK

Makaleler 20

1. A review of ultrasonic machining of brittle materials: Process parameter optimization and crack formation mechanisms

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS, PART E: JOURNAL OF PROCESS MECHANICAL ENGINEERING , cilt.1, sa.1, ss.1-13, 2026 (SCI-Expanded, Scopus)

2. Influence of manufacturing processes on fatigue life and acoustic behavior of deep groove ball bearing

Sağır G., Çiçek A., Sarıkavak Y.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS, PART E: JOURNAL OF PROCESS MECHANICAL ENGINEERING , cilt.10, ss.1-10, 2026 (SCI-Expanded, Scopus)

3. Effect of tool rotation speed on thermo-mechanical behavior in dissimilar FSW of 304L stainless steel and Ti–6Al–4V: a FEM-based approach

Alvali G. T., SARIKAVAK Y.

Journal of the Brazilian Society of Mechanical Sciences and Engineering , cilt.48, sa.2, 2026 (SCI-Expanded, Scopus)

4. Multi response optimization of welding and tempering parameters of 10mm thick dissimilar sheet steels

Sancar Y., Sarıkavak Y.

METAL SCIENCE AND HEAT TREATMENT , cilt.66, sa.11-12, ss.693-700, 2025 (SCI-Expanded, Scopus)

5. The effects of tool geometry on surface integrity in hard turning of ball bearing inner raceways

Sağır G., ÇİÇEK A., Müştak O., SARIKAVAK Y.

Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering , 2025 (SCI-Expanded, Scopus)

6. Effect of production angle on low cycle fatigue performance of 3D printed auxetic Re-entrant sandwich panels

Erkan S., ORHAN S., SARIKAVAK Y.

Construction and Building Materials , cilt.426, 2024 (SCI-Expanded, Scopus)

7. Effect of Production Angle on Low Cycle Fatigue Performance of 3D Printed Auxetic Re-entrant Sandwich Panels

Erkan S., Orhan S., Sarıkavak Y.

CONSTRUCTION AND BUILDING MATERIALS , cilt.426, ss.1-15, 2024 (SCI-Expanded, Scopus)

8. Friction stir spot weld (FSSW) of AZ91 magnesium alloys; effect of axial force and rotational speed on weld quality and an approach on inspection planning

Sarikavak Y.

Niğde Ömer Halisdemir Üniversitesi Mühendislik Bilimleri Dergisi , cilt.12, sa.4, ss.1615-1620, 2023 (TRDizin)

9. Raylı Sistem Araçlarında Yüksek Hızlı Yük Taşımacılığı İçin Düz Yol ve Kurp Şartları İçin Araç Tekerlek Bileşeninin Gerilme Analizi

SARIKAVAK Y.

Demiryolu Mühendisliği , sa.18, ss.109-120, 2023 (TRDizin)

10. Taguchi based optimization to improve mechanical properties of high carbon rail steels via bainitic microstructure

Kılıç A., Sarıkavak Y.

JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY , cilt.37, sa.5, ss.1-11, 2023 (SCI-Expanded, Scopus)

11. Dynamic wheel/rail interactions for high-speed trains on a ballasted track

SARIKAVAK Y., Goda K.

Journal of Mechanical Science and Technology , cilt.36, sa.2, ss.689-698, 2022 (SCI-Expanded, Scopus)

12. An advanced modelling to improve the prediction of thermal distribution in friction stir welding (FSW) for difficult to weld materials

SARIKAVAK Y.

Journal of the Brazilian Society of Mechanical Sciences and Engineering , cilt.43, sa.1, 2021 (SCI-Expanded, Scopus)

13. Demiryollarında Ön Germeli Traverslerin Farklı İşletme YükleriAltında Mekanik Analizi

SARIKAVAK Y.

Demiryolu Mühendisliği , cilt.0, sa.13, ss.115-121, 2021 (TRDizin)

14. Tekerlek Ray Etkileşimi; Perlitik ve Beynitik Çeliklerin Yorulma Hasar Direnci ÜzerineBir Sonlu Elemanlar Analizi

SARIKAVAK Y.

Demiryolu Mühendisliği , cilt.0, sa.14, ss.65-76, 2021 (TRDizin)

15. Experimental study of the fatigue characteristics and reliability of continuous welded rails

SARIKAVAK Y., Takeuchi T., Horiuchi T., Goda K.

Fatigue and Fracture of Engineering Materials and Structures , cilt.43, sa.8, ss.1743-1754, 2020 (SCI-Expanded, Scopus)

16. Influence of welding on microstructure and strength of rail steel

SARIKAVAK Y., Turkbas O. S., Cogun C.

Construction and Building Materials , cilt.243, 2020 (SCI-Expanded, Scopus)

17. The Impacts of Pollution for New High-Speed Railways: the Case of Noise in Turkey

Sarikavak Y., Boxall A.

ACOUSTICS AUSTRALIA , cilt.47, sa.2, ss.141-151, 2019 (SCI-Expanded) Sürdürülebilir Kalkınma

18. Demiryolu endüstrisinde akıllı ulaştırma sistemleri ve Türkiye’deki uygulama örnekleri

Sarıkavak Y.

Akıllı Ulaşım Sistemleri ve Uygulamaları Dergisi (Online) , cilt.1, sa.2, ss.22-32, 2018 (Hakemli Dergi)

19. Evaluation of morphological and chemical differences of gunshot residues in different ammunitions using SEM/EDS technique

Kara l., Sarikavak Y., LİŞESİVDİN S. B., KASAP M.

Environmental Forensics , cilt.17, sa.1, ss.68-79, 2016 (SCI-Expanded, Scopus)

20. Single discharge thermo-electrical modeling of micromachining mechanism in electric discharge machining

Sarikavak Y., Cogun C.

Journal of Mechanical Science and Technology , cilt.26, sa.5, ss.1591-1597, 2012 (SCI-Expanded, Scopus)

Hakemli Bilimsel Toplantılarda Yayımlanmış Bildiriler 10

1. The Wear and Discontinuity Analysis via Non Destructive Inspection Techniques For Engineering Materials

SARIKAVAK Y.

VI. INTERNATIONAL HALICH CONGRESS ON MULTIDISCIPLINARY SCIENTIFIC RESEARCH, İstanbul, Türkiye, 18 - 20 Ağustos 2023, ss.12-13, (Özet Bildiri)

2. Farklı Alaşımlı Çelik Malzemelerin Kaynaklanabilirlik Süreci ve Kaynak Sonrası Mekanik Analizi

Sancar Y., Sarıkavak Y.

ULUSLARARASI MARMARA FEN BİLİMLERİ KONGRESİ, Kocaeli, Türkiye, 13 - 14 Mayıs 2022, ss.129-135, (Tam Metin Bildiri)

3. REDESIGN OF WING FUSELAGE BRACKET BY USING TOPOLOGY OPTIMIZATION

Sarıkavak Y., Akbaş Y.

8. INTERNATIONAL ISTANBUL SCIENTIFIC RESEARCH CONGRESS, İstanbul, Türkiye, 12 - 13 Mart 2022, ss.1-7, (Tam Metin Bildiri)

4. Effect of rotational speed on temperature distribution in friction stir welding for dissimilar Al alloy sheets

Sarıkavak Y.

1st International Conference on Applied Engineering and Natural Sciences (ICAENS 2021), Konya, Türkiye, 1 - 03 Kasım 2021, ss.1-7, (Tam Metin Bildiri)

5. Sürtünme karıştırma kaynağında farklı Al alaşım plakalar için dönme hızının sıcaklık dağılımına etkisi

SARIKAVAK Y.

1st International Conference on Applied Engineering and Natural Sciences (ICAENS 2021), Konya, Türkiye, 1 - 03 Kasım 2021, ss.859-860, (Özet Bildiri)

6. An Experimental Investigation on Fatigue Mechanism of Continuous Welded Rails in Railways

SARIKAVAK Y., Takeuchi T., Horiuchi T., Goda K.

The 2019 International Conference on Metals and Alloys, Pekin, Çin, 19 - 22 Ağustos 2019, ss.40-41, (Özet Bildiri)

7. Fatigue Failure Assessment of Draw Hook - Manufactured By Forging - Used In Freight Transport in Railways

Atila K., SARIKAVAK Y., Merve T.

4th International Symposium on Railway Systems Engineering (ISERSE’18), Karabük, Türkiye, 10 - 12 Ekim 2018, ss.90-98, (Tam Metin Bildiri)

8. Demiryolu Endüstrisinde Akıllı Ulaştırma Sistemleri Uygulamaları

SARIKAVAK Y.

1. INTERNATIONAL CONFERENCE ON INTELLIGENT TRANSPORTATION SYSTEMS BANU – ITSC’ 18, Balıkesir, Türkiye, 19 - 21 Nisan 2018, ss.65-66, (Özet Bildiri) Sürdürülebilir Kalkınma