Yayınlar & Eserler

Yayın Ağı
Makaleler 19
Tümü (19)
SCI-E, SSCI, AHCI (15)
SCI-E, SSCI, AHCI, ESCI (16)
ESCI (1)
Scopus (18)
TRDizin (1)
Diğer Yayınlar (1)

1. Experimental and numerical analysis of surface integrity in high-speed milling of Inconel 718 with ceramic tools

Uçak N., Ribeiro M., Outeiro J.
Procedia CIRP , cilt.144, ss.502-505, 2026 (Hakemli Dergi)

2. Characterization of the friction behavior of wrought and hot isostatic pressed laser powder bed fusion Ti6Al4V alloys

UÇAK N., Aslantas K., ÇİÇEK A., Outeiro J.
CIRP Journal of Manufacturing Science and Technology , cilt.63, ss.83-96, 2025 (SCI-Expanded, Scopus)

3. Numerical analysis of the influence of sequential cuts during micro-milling of wrought and LPBF Ti6Al4V alloys

UÇAK N., Outeiro J., ÇİÇEK A., Aslantas K.
Manufacturing Letters , cilt.44, ss.622-630, 2025 (ESCI, Scopus)

4. Investigation of the effects of heat treatment and hot isostatic pressing in micro-drilling of Ti6Al4V alloy fabricated by laser powder bed fusion

Balcı A., ÇİÇEK A., UÇAK N., Aslantas K.
Precision Engineering , cilt.91, ss.617-631, 2024 (SCI-Expanded, Scopus)

5. Comparative analysis of micro-milling performances of conventionally and additively manufactured Ti6Al4V alloys: Experimental investigation and 3D modelling

Uçak N., Outeiro J., Çiçek A., Aslantaş K.
CIRP Journal of Manufacturing Science and Technology , cilt.51, ss.213-235, 2024 (SCI-Expanded, Scopus)

6. Performance of conventional and wiper CBN inserts under various cooling conditions in hard turning of AISI 52100 steel

Çetindağ H. A., ÇİÇEK A., UÇAK N., Aslantas K.
Materialpruefung/Materials Testing , cilt.66, sa.2, ss.288-298, 2024 (SCI-Expanded, Scopus)

7. An experimental study on ultrasonic-assisted drilling of Inconel 718 under different cooling/lubrication conditions

Erturun Ö. F., Tekaüt H., ÇİÇEK A., UÇAK N., Namlu R. H., Lotfi B., et al.
International Journal of Advanced Manufacturing Technology , cilt.130, sa.1-2, ss.665-682, 2024 (SCI-Expanded, Scopus)

8. Constitutive modelling of Ti6Al4V alloy fabricated by laser powder bed fusion and its application to micro cutting simulation

Uçak N., Çiçek A., Outeiro J., Aslantaş K., Çetin B.
Mechanics of Materials , cilt.185, 2023 (SCI-Expanded, Scopus)

9. Experimental evaluation of tool wear and surface roughness under different conditions in high-speed turning of Ti6Al4V alloy

Uçak N., Aslantas K., Çiçek A.
Journal of Materials and Manufacturing , cilt.2, sa.1, ss.1-10, 2023 (Hakemli Dergi)

10. Determination of the friction coefficients between uncoated WC-Co tools and L-PBF and wrought Ti-6Al-4V alloys for micro-milling simulations

Uçak N., Outeiro ., Aslantaş K., Çiçek A., Çetin B.
Procedia CIRP , cilt.117, ss.281-286, 2023 (Scopus)

11. Machinability of 3D printed metallic materials fabricated by selective laser melting and electron beam melting: A review

Uçak N., Çiçek A., Aslantas K.
Journal of Manufacturing Processes , cilt.80, ss.414-457, 2022 (SCI-Expanded)

12. Performance of Multilayer Coated and Cryo-treated Uncoated Tools in Machining of AISI H13 Tool Steel—Part 2: HSS End Mills

ÇİÇEK A., EKİCİ E., Kıvak T., Kara F., UÇAK N.
Journal of Materials Engineering and Performance , cilt.30, sa.5, ss.3446-3457, 2021 (SCI-Expanded, Scopus)

13. Performance of Multilayer Coated and Cryo-Treated Uncoated Tools in Machining of AISI H13 Tool Steel—Part 1: Tungsten Carbide End Mills

ÇİÇEK A., Kıvak T., EKİCİ E., Kara F., UÇAK N.
Journal of Materials Engineering and Performance , cilt.30, sa.5, ss.3436-3445, 2021 (SCI-Expanded, Scopus)

14. Machinability evaluations of austempered ductile iron and cast steel with similar mechanical properties under eco-friendly milling conditions

Eraslan D., Balcı A., Çetin B., UÇAK N., ÇİÇEK A., Yılmaz O. D., et al.
Journal of Materials Research and Technology , cilt.11, ss.1443-1456, 2021 (SCI-Expanded, Scopus)

15. The effects of CryoMQL conditions on tool wear and surface integrity in hard turning of AISI 52100 bearing steel

Çetindağ H. A., Çiçek A., Uçak N.
Journal of Manufacturing Processes , cilt.56, ss.463-473, 2020 (SCI-Expanded, Scopus)

16. The effects of Al2O3 coating on serrated chip geometry and adiabatic shear banding in orthogonal cutting of AISI 316L stainless steel

UÇAK N., Aslantas K., ÇİÇEK A.
Journal of Materials Research and Technology , cilt.9, sa.5, ss.10758-10767, 2020 (SCI-Expanded, Scopus)

17. Investigation of the effects of cryogenic cooling on drilling performance in drilling of Inconel 718 superalloy Inconel 718 süperalasiminin delinmesinde kriyojenik soǧutmanin delme performansi üzerine etkilerinin arastirilmasi

Ucak N., Cicek A.
Journal of the Faculty of Engineering and Architecture of Gazi University , cilt.34, sa.3, ss.1241-1252, 2019 (SCI-Expanded, Scopus, TRDizin) Creative Commons License

18. The effects of cutting conditions on cutting temperature and hole quality in drilling of Inconel 718 using solid carbide drills

Ucak N., Cicek A.
Journal of Manufacturing Processes , cilt.31, ss.662-673, 2018 (SCI-Expanded, Scopus)

19. Performance of cryogenically treated Cu and CuCrZr electrodes in an EDM process

Cetin A., Cakir G., Aslantas K., Ucak N., Cicek A.
Kovove Materialy , cilt.55, sa.6, ss.431-440, 2017 (SCI-Expanded, Scopus) Creative Commons License
Hakemli Bilimsel Toplantılarda Yayımlanmış Bildiriler 12

1. Sert Tornalama İşleminde İçten Kriyojenik Soğutmanın Yüzey Pürüzlülüğü ve Kalıntı Gerilmelere Etkileri

ÇETİNDAĞ H. A., ÇİÇEK A., UÇAK N.
7th International Symposium on Innovative Technologies in Engineering and Science (ISITES 2019), 22 - 24 Kasım 2019, ss.798-805, (Tam Metin Bildiri) Creative Commons License

2. Improvement of Machining Processes: A Case Study

GÖKÇE H., YEŞİLAY R., UÇAK N., TEKE A., ÇİÇEK A.
7th International Symposium on Innovative Technologies in Engineering and Science (ISITES 2019), 22 - 24 Kasım 2019, ss.634-641, (Tam Metin Bildiri) Creative Commons License

3. Performance of CBN Inserts in CO2 Assisted Hard Turning of AISI 52100 Bearing Steel

Çetindağ H. A., ÇİÇEK A., UÇAK N.
4th International Mediterranean Science and Engineering Congress (IMSEC 2019), 25 - 27 Nisan 2019, (Tam Metin Bildiri)

4. Design and Manufacturing of a Cost-effective In-house Charpy Impact Tester Implemented with Arduino

UÇAK N., ÜNLÜ G., YEDİPARMAK M., AKKOYUN Ş., KURT A., ŞAHİN M. O., et al.
4th International Iron and Steel Symposium, 4 - 06 Nisan 2019, (Özet Bildiri)

5. Finite element simulations of cutting force, torque, and temperature in drilling of Inconel 718

Uçak N., Çiçek A., Oezkaya E., Aslantas K.
17th CIRP Conference on Modelling of Machining Operations, CIRP CMMO, Sheffield, Birleşik Krallık, 13 - 14 Haziran 2019, cilt.82, ss.47-52, (Tam Metin Bildiri)

6. Evaluation of the effects of different manufacturing methods on tensile properties of S700MC steel

Sevinc B., Yavuz A., Yilmaz M. M., Cetin B., Ucak N., Cicek A.
27th International Conference on Metallurgy and Materials, METAL 2018, Brno, Çek Cumhuriyeti, 23 - 25 Mayıs 2018, ss.584-590, (Tam Metin Bildiri)

7. Investigation of the Effects of Cold Treatment on Wear Performance of AISI 8620 Carburized Steel

UÇAK N., ÇİÇEK A., AYVALI K., AĞCA S., ORHAN S.
8th International Advanced Technologies Symposium (IATS17), Elazığ, Türkiye, 19 - 22 Ekim 2017, (Tam Metin Bildiri)

8. Evaluation of the Hole Quality in Drilling of Inconel 718 Under Cryogenic Conditions

UÇAK N., ÇİÇEK A.
8th International Advanced Technologies Symposium (IATS17), Elazığ, Türkiye, 19 - 22 Ekim 2017, (Tam Metin Bildiri)

9. Inconel 718 Süperalaşımının Delinmesinde Kriyojenik Soğutmanın Kesme Performansı Üzerine Etkilerinin Araştırılması

UÇAK N., ÇİÇEK A.
8th International Symposium on Machining (UTIS 2017), Antalya, Türkiye, 2 - 04 Kasım 2017, (Tam Metin Bildiri)

10. Talaşlı İmalat Süreçlerinde Kriyojenik Soğutma Uygulamaları Üzerine Bir Araştırma

UÇAK N., ÇİÇEK A.
5th International Symposium on Innovative Technologies in Engineering and Science (ISITES2017), Baku, Azerbaycan, 29 Eylül - 01 Ekim 2017, (Tam Metin Bildiri)

11. PERFORMANCE EVALUATION OF S700MC AND ST52 STEELS IN TERMS OF MECHANICAL PROPERTIES AND FATIGUE LIFE

Usta T., ÇİÇEK A., UÇAK N., ÇELİK V., AĞCA S.
25th Anniversary International Conference on Metallurgy and Materials (METAL), Brno, Çek Cumhuriyeti, 25 - 27 Mayıs 2016, ss.549-554, (Tam Metin Bildiri)

12. Performance Evaluation of Cryogenically Treated Cu Cr Zr Alloy Electrodes in Electro Discharge Machining of AISI P20 Tool Steel

Çetin A., Çakır G., Uçak N., Çiçek A.
3RD INTERNATIONAL SYMPOSIUM ON INNOVATIVE TECHNOLOGIES IN ENGINEERING AND SCIENCE, Valencia, İspanya, 3 - 05 Haziran 2015, ss.662-669, (Tam Metin Bildiri)
Metrikler

Yayın

32

Yayın (Scopus)

21

Atıf (Scopus)

543

H-İndeks (Scopus)

12

Atıf (Scholar)

642

H-İndeks (Scholar)

13

Proje

3

Açık Erişim

4