Akademik Veri Yönetim Sistemi
Journal of Soils and Sediments, cilt.16, sa.10, ss.2344-2353, 2016 (SCI-Expanded)
Purpose: Extensive deposition of Pb, As, and Cs in soils may damage ecosystems and human’s health. Soil washing is the most conventional remediation method, and its efficiency depends on metal solubility in soil. This study aims to optimize operating variables of electro-kinetic field (EKF)-enhanced soil washing procedures. Materials and methods: Soil samples from a Mississippi River Delta rice field were homogeneously spiked with Pb, As, and Cs, and contaminated soil was aged for 3 months. The remediation involved a first stage electro-kinetic process, followed by a soil washing procedure. Soil pH changes under EKF were studied. Effects of citric acid and reversed EKF were investigated for alleviating possible alkaline precipitation. In the washing procedure, soil washing time and cycles with different extractants were examined. The overall EKF-enhanced soil washing efficiencies were discussed as well. Results and discussion: The implement of EKF offered an acidic soil environment around the anode areas for solubilizing metal(loid)s. Combined with EKF, citric acid was more conductive to desorb metal(loid)s. In addition, the reversed EKF effectively alleviated metal(loid) precipitation caused by alkalization in the first stage cathode areas. The EKF significantly enhanced metal(loid) extractions in the anode area of soils using Na2EDTA, CaCl2, and citric acid at pH of 2. The most preferable removal of Pb (80–98 %), As (48–63 %), and Cs (10–13 %) was achieved with three extractants. CaCl2 and citric acid were proved to be suitable alternatives to Na2EDTA for Pb extraction. A washing process of 2 h extraction with double washing cycles was optimized. Conclusions: Soil washing time and cycles were major factors governing the metal(loid) removal from soil. Washing process of 2 h extraction with double cycles was optimized for further extraction based on higher washing efficiency. The EKF effectively improved washing efficiency while some electrical parameters need further studies for cost performance consideration.