Fabrication of Two Layers Al/Cu Metal Composite by Roll Bonding  Technique

DIYALA JOURNAL OF ENGINEERING SCIENCES, vol.15, no.4, pp.1-9, 2022 (Peer-Reviewed Journal)

The sheet metal of two-layer composite (Al/Cu) is considered as one of the most

important products used in different engineering applications. The roll bonding

technique (RBT) is an active process to fabricate the metal composite due to the

occurrence of high deformation that leads to layers bonding together. In this study,

Al8112 and pure Cu were selected as the metals to create a sheet composite (Al8112/Cu)

by employing RBT on the basis of one cycle at various thickness reductions (R%; 45%,

50%, 55%, and 60%) and bonding temperatures (T; 300 °C, 400 °C, and 450 °C). The

microstructure behaviour was examined to check the overlap bonding area for the

composite layers. Vickers microhardness and tensile tests were also performed to

measure the hardness, yield strength, and tensile strength. The results revealed that the

R% had a strong effect on the interface bonding zone and hardness. It also had a

significant effect on yield and tensile strength. However, T had a small effect on the

hardness and a disparate effect on the yield and tensile strength.