Prof. VELİ ÇELİK

Publication Network

Articles 25

1. Techno-Economic and Life-Cycle Assessment of Hydrogen-Ammonia Fuel Blends in Tugboat Engines for Sustainable Port Operations

Bayer M. U., Bilgili L., Alkan S., Atak Ü., ÇELİK V.

SUSTAINABILITY , vol.17, no.22, 2025 (SCI-Expanded, SSCI, Scopus)

2. Parameter Sensitivity Analysis for Machining Operation of Autofrettaged Cylinder Using Taguchi Method

Oymak M., YILDIRIM H., YILDIZ M., Özcan B., Çelebi Y., Çelebi M. A. E., et al.

Applied Sciences (Switzerland) , vol.14, no.13, 2024 (SCI-Expanded, Scopus)

3. Numerical Analysis of Metals Under The Influence of Electromagnetic Field at Different Current Values

GÜNDOĞAN K., ÇELİK V.

Manufacturing Technologies and Applications , vol.4, no.2, pp.111-119, 2023 (TRDizin)

4. Energy Efficiency in Diesel Train Management and Modeling of Emissions in Türkiye

Akay M. E., CELİK V.

Demiryolu Mühendisliği , no.18, pp.162-170, 2023 (TRDizin)

5. Investigation of the cross-section area geometry effect on the performance of PEM fuel cell

TÜRKMEN A. C., ASEDOVA G., TIKIZ İ., ÇELİK V., ÇELİK C.

Uluslararası Yakıtlar Yanma Ve Yangın Dergisi , vol.9, no.1, pp.42-49, 2021 (Peer-Reviewed Journal)

6. Modeling of Recoil Motion of Heavy Weapons with Hydropneumatic Recoil Mechanism

TÜRKMEN İ., ÇELİK V.

International Journal of Science and Research (IJSR) , vol.10, no.3, pp.1700-1704, 2021 (Peer-Reviewed Journal)

7. Theoretical and experimental investigation of acoustic performance of multi-chamber reactive silencers

ARSLAN H., Ranjbar M., Secgin E., Celik V.

Applied Acoustics , vol.157, 2020 (SCI-Expanded, Scopus)

8. Optimization of mechanical (Swage) autofrettage process Mekanik otofretaj işleminin eniyilemesi

Celik V., Gungor O., Yildirim H.

Journal of the Faculty of Engineering and Architecture of Gazi University , vol.34, no.2, pp.855-863, 2019 (SCI-Expanded, Scopus, TRDizin)

9. Numerical evaluation of an autofrettaged thick-walled cylinder under dynamically applied axially non-uniform internal service pressure distribution

Gungor O., ÇELİK V.

Defence Technology , vol.14, no.5, pp.412-416, 2018 (SCI-Expanded, Scopus)

10. Thermo-mechanical analysis of double base propellant combustion in a barrel

Degirmenci E., Evci C., Isik H., Macar M., Yilmaz N., Dirikolu M. H., et al.

APPLIED THERMAL ENGINEERING , vol.102, pp.1287-1299, 2016 (SCI-Expanded, Scopus)

11. Experimental investigation of the factors affecting the burning rate of solid rocket propellants

Yaman H., Çelik V., Degirmenci E.

Fuel , vol.115, pp.794-803, 2014 (SCI-Expanded, Scopus)

12. Bir dizel motorun doğal gazla çalışır hale getirilmesi ve dönüştürülmüş motorun performans ve egzoz emisyonunun deneysel analizi

SEZGİN B., BİLEN K., ÇELİK V.

Mühendis ve Makina , vol.54, no.642, pp.41-51, 2013 (Peer-Reviewed Journal)

13. Scheduling in a two-machine flow-shop for earliness/tardiness under learning effect

Işler M. C., TOKLU B., Çelik V.

International Journal of Advanced Manufacturing Technology , vol.61, no.9-12, pp.1129-1137, 2012 (SCI-Expanded, Scopus)

14. Mühendislik Eğitiminde İSG

BİRGÖREN B., ÜNVER H. M., ÇELİK V.

Çalışma ve Sosyal Güvenlik Bakanlığı İSG İş Sağlığı ve Güvenliği Dergisi , no.55, pp.18-21, 2012 (Peer-Reviewed Journal)

15. Tedarik zinciri yönetiminde kamçı etkisinin incelenmesi

YEGENGİL M., ÇELİK V., ARSLAN H., SEVİNÇ A.

International Journal of Engineering Research and Development , vol.4, no.1, pp.7-15, 2012 (TRDizin)

16. An elasto-viscoplastic analysis of direct extrusion of a double base solid propellant

Kalaycioglu B., Dirikolu M. H., Çelik V.

Advances in Engineering Software , vol.41, no.9, pp.1110-1114, 2010 (SCI-Expanded, Scopus)

17. The minimization of absolute deviation from common due date in two machine flowshop scheduling with learning effect Iki makine akiş tipi üǧrenme etkili çizelgelemede ortak teslim tarihinden mutlak sapmalarin en küçüklenmesi

Işler M. C., Çelik V., TOKLU B.

Journal of the Faculty of Engineering and Architecture of Gazi University , vol.24, no.2, pp.351-357, 2009 (Scopus, TRDizin)

18. Sliding friction and wear behavior of pack-boronized aisi 1050, 4140, and 8620 steels

Soydan Y., Kossal S., De mirer A., Ĉelik V.

Tribology Transactions , vol.51, no.1, pp.74-81, 2008 (SCI-Expanded, Scopus)

19. A New Method For Extracting 3d Solid Models Of Objects Using 2d Technical Drawings

ÇAYIROĞLU İ., ÇAVUŞOĞLU A., ÇELİK V.

Mathematical Computational Aplications , vol.12, no.1, pp.31-39, 2007 (Scopus)

20. Çift Bazlı Katı Roket Yakıtının Ekstrüzyon İşlemiyle Şekillendirmesinin Sonlu Eleman Metoduyla Modellenmesi

KALAYCIOĞLU B., DİRİKOLU M. H., ÇELİK V.

Pamukkale University-Journal of Engineering Sciences , vol.13, no.1, pp.31-37, 2007 (TRDizin)

21. Vibration monitoring for defect diagnosis of rolling element bearings as a predictive maintenance tool: Comprehensive case studies

Orhan S., Aktürk N., Çelik V.

NDT and E International , vol.39, no.4, pp.293-298, 2006 (SCI-Expanded, Scopus)

22. The behaviour of a typical single-crystal Si solar cell under high intensity of electric field

Erel Ş., Akçil M., Erel G. K., Çelik V.

Solar Energy Materials and Solar Cells , vol.90, no.5, pp.582-587, 2006 (SCI-Expanded, Scopus)

23. Control freaks

Unver H., Aydemir M., Celik V.

IEE Power Engineer , vol.19, no.3, pp.36-39, 2005 (SCI-Expanded, Scopus)

24. Performance maps of a diesel engine

Çelik V., Arcaklioǧlu E.

Applied Energy , vol.81, no.3, pp.247-259, 2005 (SCI-Expanded, Scopus)

25. Bir Santrifüj Pompa Rulmanlarının Çalışabilirliğinin Titreşim Analizi ile Belirlenmesi

ORHAN S., AKTÜRK N., ÇELİK V.

Journal of the Faculty of Engineering and Architecture of Gazi üniversitesi , vol.16, no.3, pp.543-552, 2003 (Peer-Reviewed Journal)

Papers Presented at Peer-Reviewed Scientific Conferences 22

1. Design of UAV Propeller and Performing CFD Analysis

CANBAZ H. M., KARAÇOMAK Y. K., ÇELİK V., ARSLAN K.

Twentieth International Conference on Flow Dynamics (ICFD2023), Sendai, Japan, 06 November 2023, (Full Text)

2. ”Alternative Seal Application forPyrotechnic Initiator Base to be Used in Moderate Environmental Conditions”

ÇELİK V., Yırtıcı A.

7thInternational Symposium on Academic Studies in Science, Engineering and ArchitectureSciences, 15 - 17 November 2019, (Full Text)

3. Numerical Analysis of the Thermal Distribution of a Machinery Driver’s Cab

Koyuncu H., ÇELİK V.

1 st International Conference on Advances in Mechanical and Mechatronics Engineering ICAMMEN 2018, 8 - 09 November 2018, (Full Text)

4. SAFETY EVALUATION OF A FIBER REINFORCED COMPOSITE WRAPPED STEEL CYLINDER UNDER DYNAMICALLY APPLIED AXIALLY NON-UNIFORM INTERNAL SERVICE PRESSURE DISTRIBUTION

Güngör O., ÇELİK V.

1 st International Conference on Advances in Mechanical and Mechatronics Engineering ICAMMEN 2018, 8 - 09 November 2018, (Full Text)

5. Katı Roket Yakıtlarında Yanma Hızına Etki Eden Faktörler

YAMAN H., Dönmez C. E., ÇELİK V.

The Proceedings of 14th International Combustion Sysmposium (INCOS2018), 25 - 27 April 2018, (Full Text)

6. KATI ROKET YAKITLARINDA YANMA HIZINA ETKİ EDEN FAKTÖRLER

Dönmez C. E., YAMAN H., ÇELİK V.

14th International Combustion Symposium (INCOS2018), 25 April - 27 March 2018, (Full Text)

7. Yeşil Bina Sertifika Ölçütlerinin Yeşil Ergonomi Açısından Değerlendirilmesi

ÇELİK V., ERASLAN E., Uluer H. S.

23.Ulusal Ergonomi Kongresi, Adana, Turkey, 26 - 28 October 2017, pp.17, (Summary Text)

8. Performance evaluation of S700MC and ST52 steels in terms of mechanical properties and fatique life

USTA T., ÇİÇEK A., UÇAK N., ÇELİK V., AĞCA S.

Metal 2016, Brno, Czech Republic, 25 - 27 May 2016, (Full Text)

9. PERFORMANCE EVALUATION OF S700MC AND ST52 STEELS IN TERMS OF MECHANICAL PROPERTIES AND FATIGUE LIFE

Usta T., ÇİÇEK A., UÇAK N., ÇELİK V., AĞCA S.

25th Anniversary International Conference on Metallurgy and Materials (METAL), Brno, Czech Republic, 25 - 27 May 2016, pp.549-554, (Full Text)

10. İçten yanmalı motorların doğalgazla çalışır hale getirilmeleri ve dönüştürülmüş motorların performans parametrelerinin analizi

BİLEN K., ÇELİK V., GÜL S., ŞEKER İ. E.

INGAS 2013: International Natural Gas Symposium 2013, İstanbul, Turkey, 29 - 30 May 2013, (Summary Text)

Metrics

Publication

Publication (Scopus)

Citation (Scopus)

503

H-Index (Scopus)

Citation (Scholar)

H-Index (Scholar)

Project

Thesis Advisory

Open Access

UN Sustainable Development Goals

Publications & Works