Prof. ÜNAL ÇAMDALI

Publication Network

Journal articles indexed in SCI, SSCI, and AHCI 43

1. The effects of CuO/CeO2 mixture nanoparticles on the performance of a vapor compression refrigeration system

Mohamed H. A., ÇAMDALI Ü., BIYIKOĞLU A., AKTAŞ M.

Scientific Reports , vol.12, no.1, 2022 (SCI-Expanded)

2. Performance analysis of R134a vapor compression refrigeration system based on CuO/CeO2 mixture nanorefrigerant

Mohamed H. A., ÇAMDALI Ü., BIYIKOĞLU A., AKTAŞ M.

Journal of the Brazilian Society of Mechanical Sciences and Engineering , vol.44, no.5, 2022 (SCI-Expanded)

3. Enhancing the Performance of a Vapour Compression Refrigerator System Using R134a with a CuO/CeO2 Nano-refrigerant

Mohamed H., ÇAMDALI Ü., BIYIKOĞLU A., Actas M.

Strojniski Vestnik/Journal of Mechanical Engineering , vol.68, no.6, pp.395-410, 2022 (SCI-Expanded)

4. Analysis of an Electric Arc Furnace Used for Casting of Steel: An Exergy Approach

ÇAMDALI Ü., Tunc M., Arasil G.

Metallurgist , vol.64, no.5-6, pp.483-495, 2020 (SCI-Expanded)

5. Calculation of Chemical Reaction Energy in an Electric Arc Furnace and Ladle Furnace System

Camdali Ü., Tunc M.

METALLURGIST , vol.60, pp.669-675, 2016 (SCI-Expanded)

6. Numerical modeling of a ground source heat pump: The Bolu case

ÇAMDALI Ü., Bulut M., SÖZBİR N.

RENEWABLE ENERGY , vol.83, pp.352-361, 2015 (SCI-Expanded)

7. Energy Analysis of the Operation of an Electric-Arc Furnace at a Steel Company in Turkey

Tunc M., Camdali Ü., Arasil G.

METALLURGIST , vol.59, pp.489-497, 2015 (SCI-Expanded) Sustainable Development

8. The Turkish Transportation Sector and Its Thermodynamic Analysis

Camdali Ü.

ENERGY SOURCES PART B-ECONOMICS PLANNING AND POLICY , vol.10, no.4, pp.388-396, 2015 (SCI-Expanded) Sustainable Development

9. Exergy analysis of electricity generation for the geothermal resources using organic rankine cycle: Kizildere-denizli case

Tunc M., Sisbot S., ÇAMDALI Ü.

Environmental Progress and Sustainable Energy , vol.32, no.3, pp.830-836, 2013 (SCI-Expanded)

10. Cost and exergy analysis for optimization of charging materials for steelmaking in EAF and LF as a system

Yetisken Y., Camdali Ü., Ekmekci I.

METALLURGIST , vol.57, pp.378-388, 2013 (SCI-Expanded)

11. An Economic Analysis of Horizontal Ground Source Heat Pumps (GSHPs) For Use in Heating and Cooling in Bolu, Turkey

Camdali Ü., Tuncel E.

ENERGY SOURCES PART B-ECONOMICS PLANNING AND POLICY , vol.8, no.3, pp.290-303, 2013 (SCI-Expanded) Sustainable Development

12. The Modeling of Turkey's Electrical Energy Consumption and Production Policy Relating to the Kyoto Protocol

Sisbot S., Tunc M., Camdali Ü., Guelsan F. H.

ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS , vol.35, no.4, pp.380-395, 2013 (SCI-Expanded) Sustainable Development

13. Ground temperature estimations for Bolu, Turkey

ÇAMDALI Ü., Tunc M.

Environmental Monitoring and Assessment , vol.184, no.6, pp.3721-3729, 2012 (SCI-Expanded)

14. Determination of the optimum cost function for an electric arc furnace and ladle furnace system by using energy balance

ÇAMDALI Ü., Yetişken Y., EKMEKÇİ İ.

Energy Sources, Part B: Economics, Planning and Policy , vol.7, no.2, pp.200-212, 2012 (SCI-Expanded)

15. Mass analysis of an electric arc furnace (eaf) at a steel company in turkey

Tunc M., ÇAMDALI Ü., Arasil G.

Metallurgist , vol.56, no.3-4, pp.253-261, 2012 (SCI-Expanded)

16. Thermal analysis of thin multi-layer metal films during femtosecond laser heating

Karakas A., Tunc M., ÇAMDALI Ü.

Heat and Mass Transfer/Waerme- und Stoffuebertragung , vol.46, no.11-12, pp.1287-1293, 2010 (SCI-Expanded)

17. Implementation and assessment of computer integrated manufacturing in systems engineering education

Şişbot S., Tunc M., ÇAMDALI Ü.

Computer Applications in Engineering Education , vol.18, no.1, pp.117-129, 2010 (SCI-Expanded)

18. Optimal positioning of wind turbines on Gökçeada using multi-objective genetic algorithm

Şişbot S., Turgut Ö., Tunç M., ÇAMDALI Ü.

Wind Energy , vol.13, no.4, pp.297-306, 2010 (SCI-Expanded)

19. Yeditepe university computer integrated manufacturing studies

Sisbot S., Tunc M., ÇAMDALI Ü., Turkkan Y.

Computer Applications in Engineering Education , vol.17, no.1, pp.1-12, 2009 (SCI-Expanded)

20. Constructal optimisation of heat generating volumes

Karakas A., ÇAMDALI Ü., Tunç M.

International Journal of Exergy , vol.6, no.5, pp.637-654, 2009 (SCI-Expanded)

21. Transient Temperature Analysis of Slab in Erdemir

ÇAMDALI Ü., Tunç M., Şişbot S.

Journal of Iron and Steel Research International , vol.15, no.2, pp.43-45, 2008 (SCI-Expanded)

22. Energy and exergy efficiencies in Turkish transportation sector, 1988-2004

Ediger V. Ş., ÇAMDALI Ü.

Energy Policy , vol.35, no.2, pp.1238-1244, 2007 (SCI-Expanded)

23. Optimization of fossil fuel sources: An exergy approach

ÇAMDALI Ü., Ediger V.

Energy Sources, Part A: Recovery, Utilization and Environmental Effects , vol.29, no.3, pp.251-259, 2007 (SCI-Expanded)

24. Mass Balance Modeling for Electric Arc Furnace and Ladle Furnace System in Steelmaking Facility in Turkey

EKMEKÇİ İ., Yetisken Y., ÇAMDALI Ü.

Journal of Iron and Steel Research International , vol.14, no.5, 2007 (SCI-Expanded)

25. Electrical energy consumption and production of Turkey versus world

Tunç M., ÇAMDALI Ü., Liman T., Deǧer A.

Energy Policy , vol.34, no.17, pp.3284-3292, 2006 (SCI-Expanded)

26. The bio-heat transfer equation and its applications in hyperthermia treatments

Tunç M., ÇAMDALI Ü., Parmaksizoglu C., Çikrikçi S.

Engineering Computations (Swansea, Wales) , vol.23, no.4, pp.451-463, 2006 (SCI-Expanded)

27. Comparison of Turkey's electrical energy consumption and production with some European countries and optimization of future electrical power supply investments in Turkey

Tunç M., ÇAMDALI Ü., Parmaksizoglu C.

Energy Policy , vol.34, no.1, pp.50-59, 2006 (SCI-Expanded)

28. Steady State Heat Transfer of Ladle Furnace During Steel Production Process

ÇAMDALI Ü., Tunç M.

Journal of Iron and Steel Research International , vol.13, no.3, 2006 (SCI-Expanded)

29. Heat transfer analysis for industrial AC electric arc furnace

ÇAMDALI Ü., Tunç M.

Journal of Iron and Steel Research International , vol.12, no.4, pp.9-16, 2005 (SCI-Expanded)

30. Computer aided mass balance analysis for AC electric arc furnace steelmaking

ÇAMDALI Ü., Tunç M.

Journal of Iron and Steel Research International , vol.12, no.3, pp.11-13, 2005 (SCI-Expanded)

31. Computation of chemical exergy potential in an industrial AC electric arc furnace

ÇAMDALI Ü., Tunç M.

Journal of Energy Resources Technology, Transactions of the ASME , vol.127, no.1, pp.66-70, 2005 (SCI-Expanded)

32. Determination of the optimum production parameters by using linear programming in the AC electric arc furnace

ÇAMDALI Ü.

Canadian Metallurgical Quarterly , vol.44, no.1, pp.103-110, 2005 (SCI-Expanded)

33. Energy and exergy analyses in a rotary burner with pre-calcinations in cement production

ÇAMDALI Ü., Erişen A., Çelen F.

Energy Conversion and Management , vol.45, no.18-19, pp.3017-3031, 2004 (SCI-Expanded)

34. Transient temperature analysis for industrial AC Arc furnace bottom

ÇAMDALI Ü., Tunç M.

Journal of Iron and Steel Research International , vol.11, no.6, pp.1-4, 2004 (SCI-Expanded)

35. Thermodynamic analysis of some industrial applications with variable ambient conditions

ÇAMDALI Ü., Tunç M.

International Journal of Thermophysics , vol.25, no.6, pp.1965-1979, 2004 (SCI-Expanded)

36. Thermoeconomic analysis of industrial systems

ÇAMDALI Ü., Tunç M.

Journal of the Energy Institute , vol.77, no.512, pp.53-58, 2004 (SCI-Expanded)

37. Exergy analysis and efficiency in an industrial AC electric ARC furnace

ÇAMDALI Ü., Tunç M.

Applied Thermal Engineering , vol.23, no.17, pp.2255-2267, 2003 (SCI-Expanded)

38. Chemical exergy analysis of two industrial systems

ÇAMDALI Ü.

Journal of the Institute of Energy , vol.76, no.509, pp.90-96, 2003 (SCI-Expanded)

39. Second law analysis of thermodynamics in the electric arc furnace at a steel producing company

ÇAMDALI Ü., Tunç M., Karakaş A.

Energy Conversion and Management , vol.44, no.6, pp.961-973, 2003 (SCI-Expanded)

40. Energy and exergy analysis of a ladle furnace

ÇAMDALI Ü., Tunç M.

Canadian Metallurgical Quarterly , vol.42, no.4, pp.439-446, 2003 (SCI-Expanded)

41. Modelling of electric energy consumption in the AC electric arc furnace

ÇAMDALI Ü., Tunç M.

International Journal of Energy Research , vol.26, no.10, pp.935-947, 2002 (SCI-Expanded)

42. Exergy balance of a general system with variation of environmental conditions and some applications

Göǧüş Y. A., ÇAMDALI Ü., Kavsaoǧlu M. Ş.

Energy , vol.27, no.7, pp.625-646, 2002 (SCI-Expanded)

43. Thermodynamic analysis of a steel production step carried out in the ladle furnace

ÇAMDALI Ü., Tunç M., Dikeç F.

Applied Thermal Engineering , vol.21, no.6, pp.643-655, 2001 (SCI-Expanded)

Articles Published in Other Journals 19

1. A Different Opinion of Thermodynamics from the Perspective of Philosophy and Physics

Çamdalı Ü.

Uluslararası Mühendislik Araştırma ve Geliştirme Dergisi , vol.16, no.2, pp.909-913, 2024 (Peer-Reviewed Journal)

2. EKONOMİNİN TERMODİNAMİK YASALARI

ÇAMDALI Ü.

Uluslararası Mühendislik Araştırma ve Geliştirme Dergisi , 2024 (Peer-Reviewed Journal)

3. The Derivation of System Parameters for a Ground Source Heat Pump (GSHP)

ÇAMDALI Ü., TUNÇ K. M. M., ERDEM M. E., Tunçer E.

INTERNATIONAL JOURNAL OF RENEWABLE ENERGY RESEARCH , 2024 (ESCI)

4. Elektrik Ark Fırınındaki Çelik Üretiminin Termodinamik Açıdan Analizi

ÇAMDALI Ü., TUNÇ K. M. M.

Uluslararası Mühendislik Araştırma ve Geliştirme Dergisi , 2024 (Peer-Reviewed Journal)

5. DETERMINATION OF THE MASS BALANCE OF HIGH-CARBON FERROCHROME IN A SUBMERGED ARC FURNACE

Kapan S., ÇAMDALI Ü., Celik N.

High Temperature Material Processes , vol.28, no.3, pp.1-8, 2024 (ESCI)

6. Thermodynamic analysis for a solar assisted absorption cooling system: Energy and exergy bases

Akkaya M., ÇAMDALI Ü.

INTERNATIONAL JOURNAL OF RENEWABLE ENERGY RESEARCH , vol.12, pp.2189-2199, 2022 (ESCI)

7. Evaluation of a Refrigeration System Based on Nano-Refrigerants and Nano-Lubricants

A. S. H., ÇAMDALI Ü., AKTAŞ M.

AMERICAN JOURNAL OF ENGINEERING AND APPLIED SCIENCES , 2021 (Peer-Reviewed Journal)

8. Ev Tipi Bir Buzdolabının Analitik İncelenmesi ve Tasarımı

Akkaya M., ÇAMDALI Ü.

Mühendis ve Makina , 2021 (Peer-Reviewed Journal)

9. Analytical Examination of a Household Refrigerator and Obtaining Design Parameters

AKKAYA M., Camdali U.

Mühendis ve Makina , vol.62, no.704, pp.395-414, 2021 (Peer-Reviewed Journal)

10. Optimal Domestic Solar Space and Water Heating System in Cesme

Tunc M., Camdali Ü.

INTERNATIONAL JOURNAL OF RENEWABLE ENERGY RESEARCH , vol.7, no.4, pp.1806-1815, 2017 (ESCI) Sustainable Development

11. Optimal Domestic Solar Space and Water HeatingSystem in Çeşme

TUNÇ K. M. M., ÇAMDALI Ü.

Optimal Domestic Solar Space and Water HeatingSystem in Çeşme , vol.7, no.4, pp.1806-1815, 2017 (ESCI)

12. Design Graphical User Interface of Linear Algebra System Package by Using MATLAB

Alziarjawey H., ÇAMDALI Ü., ÇANKAYA İ., ALJOBOURI H.

International Journal on Recent and Innovation Trends in Computing and Communication , vol.4, no.6, pp.428-433, 2016 (Peer-Reviewed Journal)

13. Design Graphical User Interface of Linear Algebra System Package by Using

Alziarjawey H., ÇAMDALI Ü., ÇANKAYA İ., Aljobouri H.

International Journal on Recent and Innovation Trends in Computing and Communication , 2016 (Peer-Reviewed Journal)

14. Energy management and optimization: case study of a textile plant in Istanbul, Turkey

Tunc M., Kaplan K., Sisbot S., ÇAMDALI Ü.

WORLD JOURNAL OF ENGINEERING , vol.13, no.4, pp.348-355, 2016 (ESCI)

15. Termodinamik ve Sosyal Sistemlerin Yakın Çevre İlişkilerindeki İlginç Benzeşim, Değişim ve Bir Sonuç-Bir Ümit

ÇAMDALI Ü.

ANKARA UNIVERSITESI. SIYASAL BILGILER FAKULTESI DERGISI , 2012 (Peer-Reviewed Journal)

16. Economic analysis of photovoltaic systems for household applications in Turkey

ÇAMDALI Ü.

Energy Education Science and Technology Part A: Energy Science and Research , vol.24, no.2, pp.125-135, 2010 (Scopus)

17. Energy and exergy efficiencies for society

ÇAMDALI Ü., Tun ̧.

Journal of the Energy Institute , vol.81, no.2, pp.118-122, 2008 (Scopus)

18. The effect of the variation of the temperature of the surroundings on thermodynamic analysis and industrial applications Thermodinamik Analizlerde Çevre Sicakliǧinin Deǧişiminin Etkisi ve Endüstriyel Uygulamalar

ÇAMDALI Ü.

Turkish Journal of Engineering and Environmental Sciences , vol.25, no.5, pp.537-544, 2001 (Scopus)

19. An energy analysis for a type of liquid carbon steel production in an electric arc furnace Elektrik Ark Firininda Bir Cins Sivi Karbon Çeliǧi Üretimi için Enerji Analizi

ÇAMDALI Ü., Tunç M.

Turkish Journal of Engineering and Environmental Sciences , vol.25, no.5, pp.545-553, 2001 (Scopus)

Papers Presented at Peer-Reviewed Scientific Conferences 12

Books 1

1. Mühendisliğin Kültürümüzdeki Temelleri ve Mühendisliğe Hizmet Eden Bilim İnsanlarımız

ÇAMDALI Ü.

in: Düşünce ve Gelenek, M. Kazım Arıcan, Mehmet Vural, M. Enes Kala, Editor, Hece, pp.364-379, 2016

Metrics

Publication

Publication (WoS)

Publication (Scopus)

Citation (Scopus)

907

H-Index (Scopus)

Citation (Scholar)

H-Index (Scholar)

Citation (TrDizin)

H-Index (TrDizin)

Citation (Sum Other)

Project

Thesis Advisory

Open Access

UN Sustainable Development Goals

Publications & Works

Publication

Publication (WoS)

Publication (Scopus)

Citation (Scopus)

H-Index (Scopus)

Citation (Scholar)

H-Index (Scholar)

Citation (TrDizin)

H-Index (TrDizin)

Citation (Sum Other)

Project

Thesis Advisory

Open Access