Publications & Works

Publication Network

Published journal articles indexed by SCI, SSCI, and AHCI

Characterization of physical vapor deposited coating on acrylonitrile-butadiene-styrene and polycarbonate substrates Charakterisierung von physikalisch aufgedampften Beschichtungen (PVD) auf Acrylnitril-Butadien-Styrol- und Polycarbonat-Substraten

Toroslu A., TEKİNER Z., MERT F.
Materialwissenschaft und Werkstofftechnik , vol.53, no.8, pp.867-875, 2022 (SCI-Expanded) identifier identifier

The effects of punch angle in noise and force formation for sheet metal blanking process

ÇAVUŞOĞLU O., GÜRÜN H., KAFKAS F., Efendioglu S., MERT F.
Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering , vol.236, no.4, pp.1477-1484, 2022 (SCI-Expanded) identifier identifier

Wear behaviour of hot rolled AZ31B magnesium alloy as candidate for biodegradable implant material

MERT F.
Transactions of Nonferrous Metals Society of China (English Edition) , vol.27, no.12, pp.2598-2606, 2017 (SCI-Expanded) identifier

Dry sliding wear behaviour of as-cast AZ31B magnesium alloy

Mert F.
Mechanika , vol.23, no.5, pp.728-734, 2017 (SCI-Expanded) Creative Commons License identifier

A comparison of wear rate of direct and indirect resin composites: A two-body wear abrasion test

Yildirim Bicer A. Z., Karakis D., Dogan A., Mert F.
Journal of Composite Materials , vol.49, no.21, pp.2599-2607, 2015 (SCI-Expanded) identifier

Characterisation and corrosion behaviour of plasma electrolytic oxidation coatings on high pressure die cast Mg-5Al-0.4Mn-xCe (x=0, 0.5, 1) alloys

Muhaffel F., Mert F., Çimenoğlu H., Höche D., Zheludkevich M. L., Blawert C.
Surface and Coatings Technology , vol.269, no.1, pp.200-211, 2015 (SCI-Expanded) Creative Commons License identifier

Influence of Ce addition on microstructure and mechanical properties of high pressure die cast AM50 magnesium alloy

Mert F., Özdemir A., Kainer K. U., Hort N.
Transactions of Nonferrous Metals Society of China (English Edition) , vol.23, no.1, pp.66-72, 2013 (SCI-Expanded) identifier

Influence of cerium additions on the corrosion behaviour of high pressure die cast AM50 alloy

Mert F., Blawert C., Kainer K. U., Hort N.
Corrosion Science , vol.65, pp.145-151, 2012 (SCI-Expanded) identifier

Articles Published in Other Journals

Investigation of the Effect of Bonding Parameters on the Mechanical Strength of the Joint in the Adhesive Bonding of PLA Materials Produced by Additive Manufacturing

MERT F., ANAÇ N., polat n.
JOURNAL OF POLYTECHNIC-POLITEKNIK DERGISI , 2022 (Peer-Reviewed Journal) identifier

3D Printing Technology Applications in Polymeric Dressings

MERT F., demiral a.
Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji , vol.10, no.2, pp.348-359, 2022 (Peer-Reviewed Journal) identifier

A COMPARISON OF THE DRY SLIDING WEAR BEHAVIOR OFAS-CAST AND HOT ROLLED AZ31B MAGNESIUM ALLOY

MERT F.
Ömer Halisdemir Üniversitesi Mühendislik Bilimleri Dergisi , vol.7, no.1, pp.417-426, 2018 (Peer-Reviewed Journal) Creative Commons License

Magnezyum Alaşımlarının Basınçlı Döküm Yöntemiyle Kalıplanabilirliğinin Değerlendirilmesi

MERT F., ÖZDEMİR A., KARATAŞ Ç.
JOURNAL OF POLYTECHNIC-POLITEKNIK DERGISI , vol.13, no.3, pp.165-176, 2010 (Peer-Reviewed Journal)

Takım Yolu Stratejilerinin Kalıp Çekirdeklerini İşleme Süresine Etkisinin Deneysel İncelenmesi

MERT F., ULUER O., GÜLDAŞ A., ÖZDEMİR A.
JOURNAL OF POLYTECHNIC-POLITEKNIK DERGISI , vol.11, no.3, pp.215-227, 2008 (Peer-Reviewed Journal)

Refereed Congress / Symposium Publications in Proceedings

Simulation of Forward Extrusion Process for Aluminum Alloy to Investigate the Influence of Lubrication on Stress Generated

ALAMER B., ALJAWAD H., MERT F., KARATAŞ Ç.
1st International Symposium On Automotive Science and Technology (ISASTECH 2019), Ankara, Turkey, 5 - 06 September 2019, pp.175-180

Investigation for Lubrication Effect on Stress Distribution during ECAP Process by Q Form Analysis to Improve Mechanical Properties for Aluminum Alloy

ALJAWAD H., ALAMER B., MERT F., KARATAŞ Ç.
1st International Symposium On Automotive Science and Technology (ISASTECH 2019), Ankara, Turkey, 5 - 06 September 2019, pp.410-416

Gıda Sektöründe Kullanılan Endüstriyel Karıştırıcıların İncelenmesi

EKİNCİ E., MERT F.
3rd INTERNATIONAL ENGINEERING RESEARCH SYMPOSIUM (INERS’xx19), Düzce, Turkey, 5 - 07 September 2019, pp.162-167

Q FORM SIMULATION OF TEMPERATURE INFLUENCE ON LOAD DURING COMBINED BACKWARD FORWARD EXTRUSION PROCESS OF CU

ALAMER B., ALJAWAD H., MERT F., KARATAŞ Ç.
4. International Conference on Material Science and Technology in Kızılcahamam/ANKARA(IMSTEC), Ankara, Turkey, 18 - 20 October 2019, pp.476-480

THE INFLUENCE OF CURVATURE ANGLE OF ECAP PROCESS ON THE RESIDUAL STRESSES FOR THE COPPER

ALJAWAD H., ALAMER B., MERT F., KARATAŞ Ç.
4. International Conference on Material Science and Technology in Kızılcahamam/ANKARA(IMSTEC), Ankara, Turkey, 18 October 2019, pp.481-484

EFFECTS OF ZINC CONTENTS AND VELOCITY ON LOAD DURING BACKWARD EXTRUSION PROCESS IN ALUMINUM ALLOYS

ALAMER B., ALJAWAD H., MERT F., KARATAŞ Ç.
The Internatinonal Conference on Materials Science, Mechanical and Automotive Engineerings and Technology in CAPPADOCIA/TURKEY (IMSMATEC’19), Nevşehir, Turkey, 21 - 23 June 2019, pp.433-437

VELOCITY AND DIE ANGLE INFLUENCE ON STRESS DISTRIBUTION DURING ECAP PROCESS FOR ALUMINUM ALLOY

ALJAWAD H., ALAMER B., MERT F., KARATAŞ Ç.
The Internatinonal Conference on Materials Science, Mechanical and Automotive Engineerings and Technology in CAPPADOCIA/TURKEY (IMSMATEC’19), Nevşehir, Turkey, 21 - 23 June 2019, pp.700-704

Smart Manufacturing Method in Moulded White Cheese Production

MERT F., DOLGUN E. C., KARACA G., MAVUŞ R.
HASAT INTERNATIONAL AGRICULTURE AND FOREST CONGRESS, Ankara, Turkey, 21 - 23 June 2019, pp.178

Investigation the Effect of lubrication and Friction Factor on load inForward Extrusion Process For aluminum Alloy 7075 by Q Form

ALAMER B., ALJAWAD H., KARATAŞ Ç., MERT F.
2nd International Congress on Engineering and Architecture (ENAR-2019), Muğla, Turkey, 22 - 24 April 2019, pp.1117-1122

Investigation of the Effect of Velocity on Stress For ECAP process of Aluminum alloy 7075 by Q Form

ALJAWAD H., ALAMER B., MERT F., KARATAŞ Ç.
2nd International Congress on Engineering and Architecture (ENAR-2019), Muğla, Turkey, 22 - 24 April 2019, pp.1185-1192

Numerical Analysis to Investigate the Effect of Velocity on Stress For Backward Extrusion Process of Aluminum Alloy 6082

ALAMER B., ALJAWAD H., MERT F., KARATAŞ Ç.
2nd International Congress on Engineering and Architecture (ENAR-2019), Muğla, Turkey, 22 - 24 April 2019, pp.1613-1618

Numerical analysis to investigate the effect of friction factor and lubrication on load in ECAP process of Aluminum alloy 6061

ALJAWAD H., ALAMER B., MERT F., KARATAŞ Ç.
2nd International Congress on Engineering and Architecture (ENAR-2019), Muğla, Turkey, 22 - 24 April 2019, pp.1199-1204

EFFECT OF CURVATURE ANGLE ON ECAP PROCESS RESULTSFOR COPPER ALLOYS

ALJAWAD H., KARATAŞ Ç., MERT F., ALAMER B.
3nd International Conference on Material Science and Technology in Cappadocia (IMSTEC’18), Nevşehir, Turkey, 17 - 19 September 2018

STUDY THE EFFECT OF TEMPERATURE DURING HOT FORMINGFOR COMBINED BACKWARD FORWARD EXTRUSION PROCESSFOR COPPER ALLOY

ALAMER B., KARATAŞ Ç., MERT F., ALJAWAD H.
3nd International Conference on Material Science and Technology in Cappadocia (IMSTEC’18), Nevşehir, Turkey, 17 - 19 September 2018

Effect of Lubrication and Friction Coefficient on Temperature Distribution for Combined Backward Forward Extrusion Process For Alloy Steel

ALAMER B., KARATAŞ Ç., MERT F., ALJAWAD H.
6th International Symposium on Innovative Technologies inEngineering and Science, Antalya, Turkey, 9 - 11 November 2018

Effect of Die Angle on Temperature Distribution For Al6061 inECAP Process

ALJAWAD H., KARATAŞ Ç., MERT F., ALAMER B.
6th International Symposium on Innovative Technologies inEngineering and Science, Antalya, Turkey, 9 - 11 November 2018

Combined Backward Forward Extrusion Process of Aluminium Alloys

ALAMER B., KARATAŞ Ç., MERT F., ALJAWAD H.
1st International Symposium on Light Alloys and Composite Materials, Karabük, Turkey, 22 - 24 March 2018

Evaluation of ECAP Process of Magnesium Alloys for BiomedicalApplications

ALJAWAD H., KARATAŞ Ç., MERT F., ALAMER B.
1st International Symposium on Light Alloys and Composite Materials, Karabük, Turkey, 22 - 24 March 2018

AISI 304 Çeliğinin Lazer İle Kesilmesinde Kesme Parametrelerinin Yüzey Pürüzlülüğüne Etkisinin İncelenmesi

MERT F., TUNÇ M., SUR G.
5. Uluslararası Mühendislik Ve Bilim Alanında Yenilikçi Teknolojiler Sempozyumu (ISITES-2017), Baku, Azerbaijan, 29 September - 01 October 2017

Ezerek Parlatma İşleminin AZ31B Magnezyum Alaşımı Parçalarda Yüzey Pürüzlülüğü Ve Silindirikliğe Etkisinin İncelenmesi

MERT F.
Uluslararası Mühendislik Araştırmaları Sempozyum Programı (UMAS-2017), Düzce, Turkey, 11 - 13 September 2017

OTOMOTIV ENDÜSTRISINDE MAGNEZYUM ALAŞIMI UYGULAMLARI

MERT F.
1. Uluslararası Malzeme Bilimi ve Teknolojisi Konferansı (IMSTEC-2016), Nevşehir, Turkey, 6 - 08 April 2016

Characterization and wear behaviour of MAO on high pressure die cast AM50 magnesium alloy

MERT F.
6th Symposium on Biodegradable Metals, Maratea, Italy, 24 - 29 August 2014

Plastik Enjeksiyon Kaliplarinda Maliyet Tahmini

KARAAĞAÇ İ., ULUER O., GÜRÜN H., MERT F.
1. Uluslararası Plastik Kauçuk Teknolojileri Sempozyumu ve Ürün Sergisi, Ankara, Turkey, 29 - 31 May 2013, pp.29-40

Kemik Tedavilerinde Kullanılan Biyobozunur İmplant Malzemeler

MERT F., GÜRÜN H., KARAAĞAÇ İ., ULUER O.
1. Uluslararası Plastik Kauçuk Teknolojileri Sempozyumu ve Ürün Sergisi, Ankara, Turkey, 29 - 31 May 2013, pp.65-71

MAGNEZYUM ALAŞIMLARININ İŞLENMESİ

MERT F.
3.Ulusal Talaşlı İmalat Sempozyumu (UTIS-2012), Ankara, Turkey, 4 - 05 October 2012, pp.282-288

AM50 MAGNEZYUM ALAŞIMININ BASINÇLI DÖKÜMÜNDE CİDAR KALINLIĞININ MİKROYAPI ÜZERİNE ETKİSİ

MERT F.
14. Uluslararası Malzeme Sempozyumu (IMSP’2012), Denizli, Turkey, 10 - 12 October 2012, pp.138-143

Corrosion Behaviour of High Pressure Die Cast Mg-5Al-0.4Mn-xCe(x=0, 0.5, 1) Alloys

MERT F., BLAWERT C., KAINER K. U., HORT N.
9th International Conference on Magnesium Alloys and Their Applications (Mg2012), Vancouver, Canada, 8 - 12 July 2012, pp.203-208

Microstructure and mechanical properties of high pressure die cast AM50 magnesium alloy containing Ce

Mert F., Özdemir A., Kainer K. U., Hort N.
Magnesium Technology 2012 - TMS 2012 Annual Meeting and Exhibition, Orlando, FL, United States Of America, 11 - 15 March 2012, pp.149-154 identifier

Magnezyum Alaşımlarının Basınçlı Dökümü ve Otomotivdeki Uygulamaları

MERT F., ÖZDEMİR A.
6. Uluslararası İleri Teknolojiler Sempozyumu (IATS-2011), Elazığ, Turkey, 16 - 18 May 2011, pp.50-55

Takım Yolu Stratejilerinin Kalıp Çekirdeklerini İşleme Süresine Etkisinin Deneysel İncelenmesi

ÖZDEMİR A., MERT F.
11. OTOMOTİV SEMPOZYUMU-KALIPÇILIK VE TASARIM, Turkey, 8 - 09 May 2009, pp.320-327

Books & Book Chapters

4D BASKI TEKNOLOJİSİ VE GELECEKTEKİ UYGULAMALAR

MERT F., OLMUŞ Ö.
in: MALZEME TEKNOLOJİSİ VE TASARIM BİLİMLERİNE YENİ YAKLAŞIMLAR, ŞAHİN Yusuf , YALÇINKAYA Senai, Editor, Güven Plus Grup A.Ş. Yayınları, pp.221-248, 2021

Smart Manufacturing Method in Moulded White Cheese Production

DOLGUN E. C., KARACA G., MAVUŞ R., MERT F.
in: CURRENT RESEARCH AND ASSESMENTS FOR AGRICULTURAL SCIENCES, Prof. Dr. Birhan KUNTER, Assoc. Prof. Dr. Nurhan KESKİN, Editor, Cetinje, Montenegro, Ankara, pp.303-316, 2019

Metrics

Publication

45

Citation (Scopus)

109

H-Index (Scopus)

4

Project

8

Intellectual Property

2

Thesis Advisory

3

Open Access

3
UN Sustainable Development Goals